Quick Grip Clamp

Review of Irwin 757KBSG Vise Grip 7 Piece 6-Inch Long Nose, 5-Inch, 7-Inch, 10-Inch Curved Jaw with Cutter, 7-Inch, 10-Inch Locking Wrench and 12-Inch Large Jaw Locking Soft Grip Plier Set

2010-10-23T19:49:00.000-04:00

I took the soft grips off the Locking Pliers' down handle to check for country of origin. Made in USA.

Click Here to see more reviews about: Irwin 757KBSG Vise Grip 7 Piece 6-Inch Long Nose, 5-Inch, 7-Inch, 10-Inch Curved Jaw with Cutter, 7-Inch, 10-Inch Locking Wrench and 12-Inch Large Jaw Locking Soft Grip Plier Set

Product Description:

Provides even more power because the cushioned handles make it easier to apply additional pressure.

Ideal for tightening, clamping, twisting and turning.

Constructed of high-grade heat-treated alloy steel for maximum toughness and durability.

Guarded release trigger quickly unlocks and protects from accidental release.

Hardened teeth are designed to grip from any angle.

Includes:
10WR - 10" curved jaw with wire cutter
6LN - 6" long nose
7WR - 7" curved jaw with wire cutter
10LW - 10" locking wrench
7LW - 7" locking wrench
5WR - 5" curved jaw with wire cutter
12LC - 12" large jaw locking pliers

Buy Now

Review of 6R Fast Release Locking Clamp with Regular Tips

2010-10-13T16:27:00.000-04:00

These are NOT made in USA any longer. Irwin was purchased by Newell Rubbermaid and the Nebraska Visa-Grip plant was closed, its employees laid off. All Irwin products are now made in China. Read many reviews before buying--the quality is very bad. Buyer beware!

Click Here to see more reviews about: 6R Fast Release Locking Clamp with Regular Tips

Product Description:

Features and Benefits:
Introducing the new VISE-GRIP Fast Release locking tool. It offers the strength and durability of The Original, with the performance advantage of a release that is 2X easier to open. It unlocks from any angle without putting pressure on a trigger, making it ideal for professionals who work in tight spaces. The Fast Release locking tool also offers more finger room to accommodate large hands and professionals who wear gloves.

Triggerless release - requires less effort, more controlled release, eliminates potential pinch points
Increased finger room accomodates larger hands and gloves
Expanded handle - easier and more comfortable to grip
Made in the U.S.A.

Buy Now

Review of Bessey 5-1XXX Edge Clamp

2010-10-03T07:07:00.000-04:00

So this edge clamp adaptor looks like something put together as an afterthought. Don't be fooled and don't think that the other cheap knockoffs are the same. I've tried both. The bessey locks tightly and squarely to a tradesman clamp, turning it into a superior edge clamp with lots of holding power.This was a revelation to me the first time I put some oak edging on a new cabinet.Other brands I tried looked the same but did not fit tightly and took a lot more fiddling to make them work - losing a lot of time and convenience.These are also very handy for use with k-body clamps for some of those odd clamping situations you may run across.

I was so impressed that I went out and bought another half dozen.

Click Here to see more reviews about: Bessey 5-1XXX Edge Clamp

Product Description:
Edge Clamps increase the versatility of sliding bar clamps.

Buy Now

Review of Vise Grip VGP19T 11R Fast Release Locking Clamp with Regular Tips

2010-09-23T13:06:00.000-04:00

These are NOT made in USA any longer. Irwin was purchased by Newell Rubbermaid and the Nebraska Visa-Grip plant was closed, its employees laid off. All Irwin products are now made in China. Read many reviews before buying--the quality is very bad. Buyer beware!

Click Here to see more reviews about: Vise Grip VGP19T 11R Fast Release Locking Clamp with Regular Tips

Product Description:

Features and Benefits:
Introducing the new VISE-GRIP Fast Release locking tool. It offers the strength and durability of The Original, with the performance advantage of a release that is 2X easier to open. It unlocks from any angle without putting pressure on a trigger, making it ideal for professionals who work in tight spaces. The Fast Release locking tool also offers more finger room to accommodate large hands and professionals who wear gloves.

Triggerless release - requires less effort, more controlled release, eliminates potential pinch points
Increased finger room accomodates larger hands and gloves
Expanded handle - easier and more comfortable to grip
Made in the U.S.A.

Buy Now

Review of IRWIN 225104 100 Series 4-Inch C-Clamp

2010-09-13T08:06:00.000-04:00

These clamps from Irwin were much more than I expected. I mean these 4" clamps seem much larger than a little 4" clamp I thought I'd receive. You just can't beat the price or the quality. I do a lot of welding and wanted to add additional clamps to my collection. Being happy with Irwin products in the past, I went with these. I ordered 3", 4" and 6" and these are very well made. I have tightened them down to the point others would have broke and these clamps held fast with no bending, cracking or breaking. I rate these clamps a true 5 stars.

Click Here to see more reviews about: IRWIN 225104 100 Series 4-Inch C-Clamp

Product Description:
Improved screw thread tightens in half the time. Larger handle for easier tightening.

Buy Now

Review of Quick-Grip 00506 Bar Clamps

2010-09-03T08:06:00.000-04:00

I own many Quick-Grip clamps but this is the one I reach for most often.It's a full size 6" clamp, not the smaller sized 6" or mini-clamps, so it've very strong. And this short 6" length is veryhandy around the shop when you need to clamp a board down to a table, etc.My longer clamps are used for glue ups, but this size and length clampgets more use around the shop durning most projects.

Click Here to see more reviews about: Quick-Grip 00506 Bar Clamps

Buy Now

Review of Jorgensen 33406 ISD-3 6-Inch One-Handed Clamp

2010-08-24T16:49:00.000-04:00

I have many different kind of hand clamps.Jorgensen clamps are as good as the best and better than the rest.Excellent product... Convenient, strong and precise.The most used clamps in my shop.

Click Here to see more reviews about: Jorgensen 33406 ISD-3 6-Inch One-Handed Clamp

Product Description:
Jorgensen, 6" Bar Clamp, 2-3/8" Throat, Soft Durable Jaw Pads, Can Be Used In 3 Ways: Clamping, Spreading Or Connect 2 ISD3 Clamps Together To Make 1 Large Clamp, Quick Release Knob For Fast, Easy Changeovers & Dual Durometer Comfortable Handle.

Buy Now

Review of Northern Industrial Quick-Grip Drill Press Vise - 4in.

2010-08-14T15:11:00.000-04:00

I have it mounted on drill press table it has performed flawlessly...locks tight and stays locked.

Click Here to see more reviews about: Northern Industrial Quick-Grip Drill Press Vise - 4in.

Product Description:
Heavy-duty cast iron vise with high-carbon steel center bar. Mounts to any drill press with 4 base-position slots for precise drilling of clamped material. 4in. jaws open to 3 in. Quick-grip lever allows for easy positioning of material between jaws. Jaw Capacity (in.): 3, Jaw Length (in.): 4, Material: Heavy duty cast iron, Handles (qty.): 2, Mount Type: 4 base position slots

Buy Now

Review of Irwin 09SG 09-5WR Vise Grip 1-1/4-Inch Jaw Capacity 5-Inch Curved Jaw Locking Plier with Wire Cutter

2010-08-04T15:45:00.000-04:00

The pliers I got work ok but they are not as pretty with the soft handles as the picture suggests.

Click Here to see more reviews about: Irwin 09SG 09-5WR Vise Grip 1-1/4-Inch Jaw Capacity 5-Inch Curved Jaw Locking Plier with Wire Cutter

Product Description:
5WR FastRelease™ Curved Jaw w/ Wire CutterIntroducing the new VISE-GRIP Fast Release locking tool. It offers the strength and durability of The Original, with the performance advantage of a release that is 2X easier to open. It unlocks from any angle without putting pressure on a trigger, making it ideal for professionals who work in tight spaces. The Fast Release locking tool also offers more finger room to accommodate large hands and professionals who wear gloves.Triggerless release - requires less effort, more controlled release, eliminates potential pinch points. Increased finger room accomodates larger hands and gloves. Expanded handle - easier and more comfortable to grip. Made in the U.S.A.

Buy Now

Review of Irwin 5464 Mini Quick Grip Clamp

2010-07-25T16:35:00.000-04:00

I got these things for free, after I had passedthem up many timesbecause they were to expensive for a plastic clamp.
I must admit, grudgingly, that these are pretty darn good. I use them for clamping boards to the sawhorse,holding things in place for fastening.They allow you to get the boards sucked up tight before you drive a screw.They are pretty handy and have a good amount of holding power. They are super fast to use and are easy to adjust with one hand.(useful when you are holding a board in place with the other).
Update: after almost a year I have not broken one.

Click Here to see more reviews about: Irwin 5464 Mini Quick Grip Clamp

Product Description:
4 pack, 6" high carbon, heat treated steel bar. Soft, pliable pads protect fine finishes. Ideal for clamping small jobs. Slides, adjusts, and clamps all with 1 hand. Clamp for gluing, nailing, and drilling.

Buy Now

Review of IRWIN 2021436N XP QUICK-GRIP BAR CLAMP/SPREADER 36"

2010-07-15T08:21:00.000-04:00

I own all the sizes of these clamps - and every style that Irwin (and the former Vise-Grip) makes.Unlike the previous versions, these have grip power that is stunning - I use them in construction to straighten 2x4's, 2x6's, 2x8's - even 2x12's - there isn't a clamp I've used that can do this except this new "silver sided" line.

That's the key here - make sure that you buy the Irwin clamps that have the "silver" nameplate - the other Irwin clamps will not give you this performance.Don't get me wrong - all of them do a great job - but this line is far superior.

Also of note - the heads on these clamps swivel if unlocked - something to keep in mind when clamping or spreading at unusual angles.Irwin has outdone itself in designing/manufacturing this group of clamps.

Click Here to see more reviews about: IRWIN 2021436N XP QUICK-GRIP BAR CLAMP/SPREADER 36"

Product Description:
"IRWIN" XP QUICK-GRIP BAR CLAMP 36" Quick-grip XP one-handed bar clamp Up to 600lbs sustained clamping force Quick-change screw allows clamp to turn into a spreader I-beam bar removable pads 3-3/4" throat depth New feature locking swivel jaw to help conform to uneven work surfaces

Buy Now

Review of IRWIN 2021424 24-Inch XP Clamp/Spreader

2010-07-05T20:41:00.000-04:00

I own all the sizes of these clamps - and every style that Irwin (and the former Vise-Grip) makes.Unlike the previous versions, these have grip power that is stunning - I use them in construction to straighten 2x4's, 2x6's, 2x8's - even 2x12's - there isn't a clamp I've used that can do this except this new "silver sided" line.

That's the key here - make sure that you buy the Irwin clamps that have the "silver" nameplate - the other Irwin clamps will not give you this performance.Don't get me wrong - all of them do a great job - but this line is far superior.

Also of note - the heads on these clamps swivel if unlocked - something to keep in mind when clamping or spreading at unusual angles.Irwin has outdone itself in designing/manufacturing this group of clamps.

Click Here to see more reviews about: IRWIN 2021424 24-Inch XP Clamp/Spreader

Product Description:
Patented Power Locks hold more pressure, longer. Provides 500 lb. of 1 handed force (900 lb. of 2 handed force.) I beam bar resists twisting and bowing, allowing maximum force to be applied. Quick Release trigger for nonexplosive pressure release. Quick C

Buy Now

Review of Jorgensen 33424 ISD-3 24-Inch One-Handed Clamp

2010-06-25T16:20:00.000-04:00

These rock, much better than the Irwin's, and just as expensive, BUT more versatile!

Amazon's packaging of clamps have *much* to be desired, as I received 4 clamps in a box, with crimpled up paper, that was the packaging, 3 were OK and the 4th was missing the bar stop pin(it was in box) so it vibrated loose during shipment.

Click Here to see more reviews about: Jorgensen 33424 ISD-3 24-Inch One-Handed Clamp

Product Description:
Jorgensen, 24", Bar Clamp, 2-3/8" Throat, Soft Durable Jaw Pads, Can Be Used In 3 Ways: Clamping, Spreading Or Connect 2 ISD3 Clamps Together To Make 1 Large Clamp, Quick Release Knob For Fast, Easy Changeovers & Dual Durometer Comfortable Handle.

Buy Now

Review of Five Star Knob with 1" Stud, 1/4" 20 tpi

2010-06-10T01:49:00.000-04:00

I used the 5 star know to replace a knob on my daughter's custom made wheelchair.It worked perfectly and the description given was helpful in deciding which to buy.

Click Here to see more reviews about: Five Star Knob with 1" Stud, 1/4" 20 tpi

Product Description:
Three different styles available (sold separately). Each style is available in thread sizes: 1/4"-20, 5/16"-18 and 3/8"-16.

The 2" T knob with Through-Hole (shown left) gives you that little extra torque when you need it. Narrow profile allows better clearance.

The Five Star Knob with Through-Hole (shown center) and insert accommodates bolts of various lengths. Works great with our T-slot system.

The Five Star Knob with 1" Stud (shown right) is the studded version of our most popular knob.

Buy Now

Review of Irwin 04SG 7LW Vise Grip 7-Inch Soft Grip Locking Wrench

2010-06-09T12:58:00.000-04:00

Product makes a great addition to my vise grip set, previosly purchased. Soft gips really helps my "old hands".

Click Here to see more reviews about: Irwin 04SG 7LW Vise Grip 7-Inch Soft Grip Locking Wrench

Product Description:
Turn screw to adjust pressure and fit work. Stays adjusted for repetitive use. Constructed of high-grade heat-treated alloy steel for maximum toughness and durability. Guarded release trigger quickly unlocks and protects from accidental release. Size: 7" (175mm). Jaw Capacity: 3/4" (19mm).

Buy Now

Review of Steck Manufacturing 23230 Plugweld Pliers

2010-06-08T14:04:00.000-04:00

They're expensive, but they're worth it!They're beefy, well built and work great.Worth every penny.

Click Here to see more reviews about: Steck Manufacturing 23230 Plugweld Pliers

Product Description:
Plugweld Pliers allow you to get aggressive with welding panels together.Reduce the risk of burn through from your welder.The special copper alloy backing plate prevents burn through and the weld can't stick to the copper, even if a pilot hole was used. This is a great accompanying tool to a MIG welder.

Buy Now

Review of Kant Twist 2.5" Oal Grip Handles

2010-06-07T21:08:00.000-04:00

Way easier on your hands. My only complaint is that they should be included with the clamp.

Click Here to see more reviews about: Kant Twist 2.5" Oal Grip Handles

Product Description:
Handle Grips - Metalworking ClampsFor Use With: Kant-Twist® - 405, 407 & 505 ClampsLength: 2-1/2

Buy Now

Review of Bessey XV5-100 4-Inch VarioClippix Sliding Arm Plastic Spring Clamp

2010-06-06T09:40:00.000-04:00

What a great clamp!! Replaces all your other spring-type clamps in one unit. Holds just about any 4 inch or less wood joint together plenty tight for gluing. Quick and easy to adjust. For routine smaller work, this is the only clamp you need to reach for! Suggest the 4 inch rather than 3 inch size.

Click Here to see more reviews about: Bessey XV5-100 4-Inch VarioClippix Sliding Arm Plastic Spring Clamp

Product Description:
A clever variation on a spring clamp, the unique design of this variable capacity clamp lets you create an infinite range of openings up to 4", with constant, firm pressure at all openings. The top jaw slides easily with one hand, and it grips firmly on the notched rail to ensure a firm grip at all settings. The variable opening also controls the pressure. For lighter pressure, click jaws wider than your work; for maximum pressure, click jaws down to a smaller opening. The soft pivoting pads provide a firm grip on your work while remaining gentle on your work surfaces. The large ergonomic handles are easy to operate at any and all openings with their nonslip inserts for a firm, safe grip.

Buy Now

Review of Wilton 63144 Heavy-Duty Woodworking Vise

2010-06-05T16:34:00.000-04:00

This is the first woodworkers vise that I have ever owned, and I did as much research as possible before buying. I found at least four models in various 'box' stores and woodworkers stores. Every one seemed crudely made. I compared a few models available from Amazon, but lacked enough experience to make an informed choice. I ordered the Wilton because of the generally favorable reviews. It looks and feels like a quality tool. I think that I will like the fact that the screw is covered by the frame, and will not easily collect dust. My first serious use was to debark some small logs. I found that the outside jaw face swiveled nicely to provide a firm grip on almost any log, the mechanism was quick to operate and a pleasure to use, and there was no 'give' whatsoever when I peeled off large strips of wood with my drawknife.
I am really happy with my choice.

Click Here to see more reviews about: Wilton 63144 Heavy-Duty Woodworking Vise

Product Description:
This woodworkers vise includes a metal housing which fully encloses the screw, preventing sawdust and dirt from "gumming" the threads. Not only does this keep the threads clean, but it also increases the life of the vises rapid action release mechanism. Front jaw pivots 12 degrees to allow clamping of irregularly shaped objects and the entire front jaw can be "lifted" up and locked in place to serve as a full length dog. Jaw width is 4" x 7". Max. opening is 0". 29 lb. Complete with mounting instructions. Vise shown with optional magnetic maple jaw sold separately.

Buy Now

Review of REVO Fixed Jaw Parallel Clamp, 24"

2010-06-04T11:20:00.000-04:00

Bessey makes the best clamps by far.A lot of imitators but none better.

Click Here to see more reviews about: REVO Fixed Jaw Parallel Clamp, 24"

Product Description:
This 24" fixed jaw parallel clamp features a large, flat parallel clamping surface made of impact and break resistant polyamide that comes with three replaceable pressure caps that are glue, paint and grease resistant. The internal frame ensures accurate 90-degree angles which are very sturdy even at maximum pressures. A large, comfortable two-component composite handle with a soft plastic insert makes a comfortable grip. Rail protection pieces made of same glue resistant polyamide elevate the workpiece from the rail, and the removable end rail clip ensures that the clamp sits parallel to the rail and can easily be removed to reverse sliding arm for use as a spreader.

Buy Now

Review of IRWIN 2021436 36-Inch XP Clamp/Spreader

2010-06-03T16:45:00.000-04:00

Overall the clamp/spreader from Irwin it is an excellent tool. Easy of use, great quality and satisfactory force for the projects. I am very satisfied with the unit.

Click Here to see more reviews about: IRWIN 2021436 36-Inch XP Clamp/Spreader

Product Description:
Patented Power Locks hold more pressure, longer. Provides 500 lb. of 1 handed force (900 lb. of 2 handed force.) I beam bar resists twisting and bowing, allowing maximum force to be applied. Quick Release trigger for nonexplosive pressure release. Quick C

Buy Now

Review of Bessey TGJ2.536 2-1/2-Inch x 36-Inch Regular Duty Tradesmen Bar Clamp

2010-06-02T12:50:00.000-04:00

The nice thing about the Bessey Tradesmen's is that they are heavier duty than the competition, in the medium duty class, and you don't have to take out a second mortgage to afford a set of them. The locking mechanism works without any hassles, and the grip is strong. All in all a nice piece of equipment. A major competitor sells this model for less money, but it is also a lighter weight clamp. I like them all. Bessey makes great stuff, you can't go wrong with these. They are a great general-purpose clamp. Highly recommended.

Click Here to see more reviews about: Bessey TGJ2.536 2-1/2-Inch x 36-Inch Regular Duty Tradesmen Bar Clamp

Product Description:
This Tradesman Medium Duty Clamp has a 36" clamping capacity, 1" x 1/4" rail size, 2-1/2" throat depth, and nominal clamping pressure of 600 lbs. It is part of Besseys Tradesman line of bar clamps that features a patented nonslip locking system, greater holding power than any other clutch-style clamp, corrugated cast jaws, high quality galvanized profiled rail, coated oversized acme thread, large ergonomically shaped wood handle, and glue-resistant non-marring plastic caps.

Buy Now

Review of Bessey TG4.016 4-Inch x 16-Inch Regular Duty Tradesmen Bar Clamp

2010-06-01T19:04:00.000-04:00

I've always used the clutch style bar clamp and have about two dozen of various sizes of a bargain brand. They have always performed acceptable, but when I saw on Amazon some Bessey clutch style clamps at very reasonable prices, I thought I would try some. For just a little more money, the Bessey is twice the quality. So I needed some clamps with a little more reach and decided to give the tradesmen style a try. Very impressed, the adjustable arm stays where you put it, the bar stock is very "beefy". Quality at a reasonable price. No more bargain brand for me.

Click Here to see more reviews about: Bessey TG4.016 4-Inch x 16-Inch Regular Duty Tradesmen Bar Clamp

Product Description:
This Tradesman Heavy Duty Bar Clamp has a 16" clamping capacity, 1" x 5/16" rail size, 4" throat depth, and nominal clamping pressure of 800 lbs. It is part of Besseys Tradesman line of bar clamps that features a patented nonslip locking system, greater holding power than any other clutch-style clamp, corrugated cast jaws, high quality galvanized profiled rail, coated oversized acme thread, large ergonomically shaped wood handle, and glue-resistant non-marring plastic caps.

Buy Now

Review of Bessey TGJ2.530 2-1/2-Inch x 30-Inch Regular Duty Tradesmen Bar Clamp

2010-05-31T20:13:00.000-04:00

I just bought this clamp four days ago to try them and they're great. Returned to Amazon today to buy six more and some 24" and 36" but the price was raised from $12.20 to 15.95. Will shop somewhere else.

Click Here to see more reviews about: Bessey TGJ2.530 2-1/2-Inch x 30-Inch Regular Duty Tradesmen Bar Clamp

Product Description:
This Tradesman Medium Duty Clamp has a 30" clamping capacity, 1" x 1/4" rail size, 2-1/2" throat depth, and nominal clamping pressure of 600 lbs. It is part of Besseys Tradesman line of bar clamps that features a patented nonslip locking system, greater holding power than any other clutch-style clamp, corrugated cast jaws, high quality galvanized profiled rail, coated oversized acme thread, large ergonomically shaped wood handle, and glue-resistant non-marring plastic caps.

Buy Now

Review of Quick-Grip 00500 7-1/4-Inch Spreader Clamp

2010-05-30T13:26:00.000-04:00

As with the entire quick grip products the features that should entice you to buy and use the Quick-Grip 00500 7-1/4" Spreader Clamp are the ease of adjustment and the fact that it won't mar even the softest of wood yet still provide ample force for your project.People with low hand strength or hand pain can use the trigger ratchet used for the adjustment with ease. It only requires a firm squeeze slightly over the pressure used for scissors.

Click Here to see more reviews about: Quick-Grip 00500 7-1/4-Inch Spreader Clamp

Product Description:
Convenient one-handed application and features of traditional Quick-Grip bar clamp. Provides controlled outward pressure facilitating disassemblly without he need for striking surfaces. Ideal tool for cabinet making, woodworking and furniture restoration. 7-1/4 in. maximum jaw opening, 27.5 in. throat depth capacity.

Buy Now

Review of MLCS Boomer RED Bar Clamp and Guide Fence System 36" Grip

2010-05-29T08:12:00.000-04:00

Let me preface this review with this, these are the only long bar clamps I've ever used so I am in no way knowledgeable on this subject. However, I'm quite pleased with these.

Here is how I used them. Using a measure, I laid out a pencil line of my cut plus the distance from the edge of my circular saw fence to the blade plus a thirty second to leave for finish sanding. Then I carefully attached the bar clamp to the piece. They attach white tightly without marring the surface. Then I simply held the circular saw against the clamp and made my cut.

Please note, these do not automatically attached at a perfect 90-degree angle. You must carefully align them to your desired angle. I see this as a feature as it has allowed me to make plus or minus five or ten degree cuts. It also allowed the tolerance I needed to square my wood since I do not have a planer.

From what I've read, there are much better clamps out there, but I don't know enough to realize why you would pay much more money for them. These attach firmly without marring. They are very rigid from side to side. They are easy to use. They work.

I am an infrequent wood worker, and I highly recommend them. I built several pieces of furniture (bookshelves, a full length mirror, and a decorative ladder to hang clothes on) with them with great success.

Click Here to see more reviews about: MLCS Boomer RED Bar Clamp and Guide Fence System 36" Grip

Product Description:
The Boomer RED Clamp is an excellent, obstruction free guide fence for routing, sawing, and more. Smooth, quick action one-hand operation clamp. Lightweight aluminum extrusion construction is straight, flat, and strong. Virtually no side-to-side movement as is common in other clamps. 2 Accessory T-Tracks are milled into the top surface of each side of the clamp. Measuring Rule is also mounte on top surface of the clamp. Clamps can be joined vertically or side-to-side to create a "back-to-back" clamp relationship. Clamp mechanism is heat-treated steel fo long wear and positive clamping action. Squre face jaws are made of hig-impact, super-durable ABS.

Buy Now

Review of 9 In Locking Panel Clamp

2010-05-28T12:02:00.000-04:00

Vise-Grip 9ac Lockng Panel Clamp Vise-grip Pliers

My husband does body work and he has looked for these forever. This is an excellent Christmas gift. I'm sure he will love it. Thanks a bunch.

Click Here to see more reviews about: 9 In Locking Panel Clamp

Product Description:
9"/225mm locking panel clamp with 3/8"/10mm jaw opening. Throat depth - 7/32"/6mm. Provides quick clamping and alignment of auto body panels. Bottom jaw slides in straight line motion.

Buy Now

Review of Tru-Grip BB36C 36-Inch Grip Back-To-Back Bench Clamp

2010-05-27T16:24:00.000-04:00

I have the Tru grip 24" clamp, which is great for an edge guide. I also bought a set of the Pro FTR Series clamps by Tru Grip that enable you to use special base plates for your router or circular saw. I have the 2, 4, and 8 foot size. With the circular saw you now have a portable panel cutter. They also double as a large edge guide. Tru grip products are built substantially and are designed to last a long time. So that brings me up to the back to back clamps.
These are great as an edge guide clamp, and their unique feature is that they have a second set of clamps facing topside that enable you to grip your work piece. The nice thing is that the clamps are not deep, so you can take a 3/4" piece of stock and grip it, and the clamps won't get in the way. So if you were sanding, you no longer have to clamp and change, clamp and change.
Tru grip has come up with a clamping mechanism that is great to use. No fiddling with settings. It is all pre-determined. All you have to do is snug the clamp up against the work piece at both ends, then push the lever down and it is clamped. If you push it down even further to the next stop it is really gripped tightly. So it is easy and intuitive to use.
I wish I had a downside to comment on, but I don't. The only thing I can say that is wrong with having a set of these, is that it would be better if I had a set in every size.
Overall highly recommended.

Click Here to see more reviews about: Tru-Grip BB36C 36-Inch Grip Back-To-Back Bench Clamp

Buy Now

Review of Irwin 07SG 7WR Vise Grip 1-1/2-Inch Jaw Capacity 7-Inch Curved Jaw Soft Grip Vise Grip with Wire Cutter

2010-05-26T17:36:00.000-04:00

It works like most any other Vise Grip. The handle is comfortable. Problem is that I have had to keep adjusting the knob as I use it. And sometimes it is difficult to open up the Vise Grip. Especially as you are working on anything oily, like a car. Still without it, some jobs are near impossible.

Click Here to see more reviews about: Irwin 07SG 7WR Vise Grip 1-1/2-Inch Jaw Capacity 7-Inch Curved Jaw Soft Grip Vise Grip with Wire Cutter

Product Description:
Item #: VGP7WRSG.
Features & Benefits:

Provide even more power because the cushioned handles make it easier to apply additional pressure
Ideal for tightening, clamping, twisting and turning
Turn screw to adjust pressure and fit work. Stays adjusted for repetitive use
Constructed of high-grade heat-treated alloy steel for maximum toughness and durability
Guarded release trigger quickly unlocks and protects from accidental release
Hardened teeth are designed to grip from any angle
7" Locking curved jaw w/cutters and soft grip handles

Customers also search for: Discount 7" Curved Jaw Locking Pliers w/Cutter and Soft Grip Handles, Buy 7" Curved Jaw Locking Pliers w/Cutter and Soft Grip Handles, Wholesale 7" Curved Jaw Locking Pliers w/Cutter and Soft Grip Handles, 38548030074, ToolWeb, Locking Clamps

Buy Now

Review of Irwin 1078TRSG Vise Grip 10 Piece Locking Plier Set with Soft Grip

2010-05-25T08:10:00.000-04:00

This set includes 8 soft grip pliers model numbers: 10R, 10WR, 9LN, 7LW, 7R, 7WR, 6LN, and 5WR.It also includes 2 locking clamps: 11R and 6R.They don't come with the soft grips.I'm guessing they're counting the plastic tray as the 11th peice of the set.In the printed catalog, this set is listed as an 8 peice set with two bonus locking clamps.Either way, it's the same 10 peice set with a plastic tray to put in the drawer of your tool box.By the way, the tray is about 17" x 26" x 1 1/2".
All of the pliers are solidly built and the soft grips make them feel nicer than the bare metal ones.They also provide a better grip.If you really want to, you can take the grips off by sliding them off.You can't go wrong with a good set of genuine Vise-Grips like this one.

Click Here to see more reviews about: Irwin 1078TRSG Vise Grip 10 Piece Locking Plier Set with Soft Grip

Product Description:
Item #: VGP1078TRSG.
Features & Benefits:

Includes (1) each:

6R, 11R, 10R, 10WR, 9LN, 7R, 7WR, 7LW, 6LN and 5WR
Packaged in a blow molded tray

Customers also search for: Discount 10 Piece Master Locking Pliers Set w/Soft Grip Handles, Buy 10 Piece Master Locking Pliers Set w/Soft Grip Handles, Wholesale 10 Piece Master Locking Pliers Set w/Soft Grip Handles, 038548017785, ToolWeb, Locking Clamps

Buy Now

Review of 24" PRO-GRIP STRAIGHT EDGE CLAMP

2010-05-24T19:25:00.000-04:00

These things are very useful in the workshop. Quick and easy to use with varying levels of tightness. I have two - one 24" and one 48". I've had them a few weeks and used them as guides for routing, sawing and 101 other things already. Terrific. A bit expensive, but the kind of investment that should last for quite a while. Came quickly and well-packed. No regrets.

Click Here to see more reviews about: 24" PRO-GRIP STRAIGHT EDGE CLAMP

Product Description:
The Pro-Grip straight edge clamp is an obstruction free, easy to use straight edge. A perfect woodworking combination edge guide and clamp system. Quick, easy and adjustable edge to edge clamping with low profile jaws that don't get in the way. Triple cam lock lever for easily securing your stock or your clamp to the table top surface.

Buy Now

Review of 9" Vise Grip Locking Cl (586-9SP) Category: Locking Pliers

2010-05-23T16:37:00.000-04:00

the lock/unlock lever can not be pressed easily to unlock the clamp.The push rod from the clamp arm to the adjust screw pops out very often, you have to push it back to its position.
Pay few more bucks and get a Stanely or Irwin

Click Here to see more reviews about: 9" Vise Grip Locking Cl (586-9SP) Category: Locking Pliers

Product Description:
Item #: 586-9SP. Wide-opening jaws provide greater versatility in clamping a variety of shapes
Swivel pads hold tapered work, awkward fabricating jobs, and delicate projects without damaging the work surface
Turn screw to adjust pressure and fit work. Stays adjusted for repetitive use
Constructed of high-grade heat-treated alloy steel for maximum toughness and durability
Guarded release trigger quickly unlocks and protects from accidental release

Packing Type = Carded
Overall Length = 9 in
Chain Jaw Opening = 0 in [Min], 4 1/2 in [Max]
Jaw Point Throat Depth = 4 3/4 in
Mechanism = Adjustable Mechanical Locking
Material = Alloy Steel
Type = Locking Plier Clamp

Customers also search for: Tools and Storage\Hand Tools\Pliers and Cutters\Locking Pliers Discount 9" Vise Grip Locking Cl, Buy 9" Vise Grip Locking Cl, Wholesale 9" Vise Grip Locking Cl, 038548003108, 9SP, Locking Pliers

Buy Now

Review of Vise Grip 4WR 4-Inch Curved Jaw Locking Pliers with Wire Cutter

2010-05-22T07:38:00.000-04:00

Outstanding tool. Carry it my car and truck. Difficult to find a 4 inch vise grip in many stores.

Click Here to see more reviews about: Vise Grip 4WR 4-Inch Curved Jaw Locking Pliers with Wire Cutter

Product Description:
Item #: VGP4WR.
Features & Benefits:

Size: 4"
Size - metric: 100mm Jaw
Adjustment: 0 - 15/16"
Jaw adjustment - metric: 0 - 24mm
Package: Boxed

Customers also search for: Tools and Storage\Hand Tools\Pliers and Cutters\Locking Pliers Discount 4" Curved Jaw Locking Pliers w/Wire Cutter, Buy 4" Curved Jaw Locking Pliers w/Wire Cutter, Wholesale 4" Curved Jaw Locking Pliers w/Wire Cutter, 038548000107, ToolWeb, Locking Clamps

Buy Now

Review of Grip-On-Tools Quick-Ratcheting Bar Clamp - 12in.

2010-05-20T22:14:00.000-04:00

These are being sold as 36" clamps.
what you receive is 12"

Click Here to see more reviews about: Grip-On-Tools Quick-Ratcheting Bar Clamp - 12in.

Product Description:
Strong, lightweight bar clamp quickly converts from clamp to spreader. Nylon fiber-filled jaws. Clamp Type: Bar, Clamp Length (in.): 12

Buy Now

Review of Set of Two 4" Mini Pistol Grip Bar Clamps & Spreaders w/ Quick-Release

2010-05-19T18:42:00.000-04:00

I originally bought some of these at TSC store, they never got them in again
so looked for them and found the best buy on Amazon. They work great to hold my
wood work while glue dries. They are just like the large ones, just smaller.

Click Here to see more reviews about: Set of Two 4" Mini Pistol Grip Bar Clamps & Spreaders w/ Quick-Release

Product Description:
Excellent quality and durability. Simply reverse jaws for handy spreader.

Buy Now

Review of IRWIN 2021418 18-Inch XP Clamp/Spreader

2010-05-18T03:22:00.000-04:00

these clamps are a must-have if you build houses, or anything else for that matter, they will pull ANY 2 pieces of anything together with ease and hold it exactly where you want it for 5 seconds or 5 months. You can put 550 lbs. of force with one hand or up to 950 lbs. of force with both hands. It is extremely rare to find something that it cannot pull together, however, if you're not careful you can tear up something very easily if you don't keep in mind how powerful these things are...

Click Here to see more reviews about: IRWIN 2021418 18-Inch XP Clamp/Spreader

Product Description:
Patented Power Locks hold more pressure, longer. Provides 500 lb. of 1 handed force (900 lb. of 2 handed force.) I beam bar resists twisting and bowing, allowing maximum force to be applied. Quick Release trigger for nonexplosive pressure release. Quick C

Buy Now

Review of 4 Pack Irwin 225103 Quick-Grip 3" C-Clamp

2010-05-17T02:23:00.000-04:00

this company advertised 4 clamps for the price they listed.they informed that was a misprint and it should have been only 1 clamp.they did issue a $10.00 credit.i won't buy from them again.bob g.

Click Here to see more reviews about: 4 Pack Irwin 225103 Quick-Grip 3" C-Clamp

Product Description:
The Irwin 3" C-Clamp 100 Series has many improvements. The handle is bigger which makes it 25% easier to apply torque. This feature will reduce hand fatigue and make it easier to apply force. The double threaded screw allows you to create 50% more pressure than the nearest competitor. This will reduce hand fatigue and make it easier to apply force. The double threaded screw will give you 50% less screw deflection which will save you time by reducing drift.

Buy Now

Review of Quick-Grip Clamp - 6in.

2010-05-16T09:35:00.000-04:00

The big benefit to these is that you get true mobility out of them. While holding a piece of work, lined up, in one hand, you use these quick grips in the other hand to secure the work. If it slips while clamping, it is still a one handed tool to release it, and reclamp it again. Enables you to maintain a professional flow to your work. I feel awkward when using regular clamps in comparison. They require two hands. You could use a spring clamp to hold it together, then get another clamp to give it a final hold, but the quick grip saves you from having to do that.
Having these clamps in a few different sizes is beneficial as well. Small ones are more frequently used, and don't get in the way. The 33 1/2" is great when you need to hold larger projects together, and you can't effectively use two smaller ones to substitute. Additionally the macro clamps give you deeper jaws for a farther reach, enabling you to use them for securing work, to your radial arm saw table for example. They are fast enough to be used for almost any application. Sometimes I use them to secure work when sanding with a power sander. A couple squeezes and they are on, and one squeeze and they pop off.
After getting the smaller ones, and using them, I immediately order two of the 33 1/2" for larger projects, and for tie downs on equipment, including the drill press, and occasionally the radial arm saw.
Their is a small rubber stopper, which you can readily remove, in order to reverse the end, and make it a spreader as well. Something not needed very often, but difficult to achieve without one of these.
One note is that these have built in rubber pads, that completely cover the metal internal end. That is an advantage when you do not want to mar the wood. That and the fact that you can squeeze these with one hand, creates a mechanism that is easy to use, but not something that you would want to use for strength clamping. As a safety measure, these clamp sufficiently for most operations, but a threaded bar clamp, is stronger. So for those operations where extreme strength is needed, these are not the clamps to use. You sacrifice mountain holding strength for the ease of use. For example if I was using a large bit on the drill press, and drilling into metal, I would clamp it with something more. Even the slightest movement in an operation like that, could cause a snag, sending the piece into movement. If you are using just one of them, at the end of a 24" board, and decide to rout the other end, it will move on you. Securing it with two of them, and it is super tied down. You get my drift.
The big advantage of quick grip clamps, is that they handle wood beautifully, even for glue up operations. Hold workpieces more than securely to do the job in most applications, and are so handy that they deserve more than 5 stars. I would feel lost without them. It is another tool in the must have category.

Click Here to see more reviews about: Quick-Grip Clamp - 6in.

Product Description:
Versatile quick-grip bar clamps are ideal for clamping or spreading. Quick advance trigger moves jaws twice as fast as standard clamps. Head or tail can be used anywhere on the bar for ultimate positioning. Heat treated steel bar with resin head and tail provide lightweight strength and durability. Clamp pressure: 250 lbs. Throat: 3 1/4in. U.S.A.

Buy Now

Review of 6" Speedy Grip Bar Clamp

2010-05-15T01:37:00.000-04:00

The quality is better than expected for the price.A pleaseant surprise.
Would have cost me twice as much locally.Recomend.

Click Here to see more reviews about: 6" Speedy Grip Bar Clamp

Product Description:
Excellent quality and durability. Simply reverse jaws for handy spreader. * One of the handiest, most effective tools ever invented! Easily converts from clamp to spreader * Allows you to quickly clamp objects and apply incredible clasping force with just trigger squeeze * Super-useful for word-working projects--lets you glue like a pro! 6" clamp capacity * Push-button instant release, non-marking high-grip pads, tough ABS jaws & handle * Heavy-gauge steel shaft with corrosion resistant black oxide finish; length overall 13"

Buy Now

Review of Bessey TGJ2.512 2-1/2-Inch x 12-Inch Regular Duty Tradesmen Bar Clamp

2010-05-14T21:58:00.000-04:00

I own several of these Bessey clamps in various lengths, and I think the world of them.I have never experienced the bar "bowing" like other clamp bars tend to do.With a reasonable pricetag, I think these aresome of the better all-around clamps on the market.

Click Here to see more reviews about: Bessey TGJ2.512 2-1/2-Inch x 12-Inch Regular Duty Tradesmen Bar Clamp

Product Description:
This Tradesman Medium Duty Clamp has a 12" clamping capacity, 1" x 1/4" rail size, 2-1/2" throat depth, and nominal clamping pressure of 600 lbs. It is part of Besseys Tradesman line of bar clamps that features a patented nonslip locking system, greater holding power than any other clutch-style clamp, corrugated cast jaws, high quality galvanized profiled rail, coated oversized acme thread, large ergonomically shaped wood handle, and glue-resistant non-marring plastic caps.

Buy Now

Review of Quick-Grip 00556 Hold Down Clamps

2010-05-13T19:02:00.000-04:00

The Quick Grip Hold Down clamp is an excellent tool.I have mine mounted to my B&D WorkMate and have used extensivley since I bought it.The only problem I have with it is that it requires the flange to be screwed to the underside of the work surface thus not making it very portable.I would like to see the clamp be quickly moved from one hole to the next simply by pulling a release on the bottom of the clamp (instead of an awkward cotter pin) and using a large flange that slides over brackets that were previously attached to the underside of the work surface.That being said the hold down clamp securley clamps pieces and can swivel 360 degrees.Excellent buy.Extra flanges are also available I bought a pack of two (2) for ten dol lars Canadian.

Click Here to see more reviews about: Quick-Grip 00556 Hold Down Clamps

Buy Now

Review of Quick-Grip 00524 Bar Clamps

2010-05-12T22:15:00.000-04:00

These clamps are the better mousetrap in today's woodworking.To a guylike me who works alone, and often needs an extra hand, these clamps are ablessing.Providing the means for one handed clamping is great and thenon-marring faces NEVER leave marks on the wood.An added feature which Ilike is the fact that the design of these clamps will not allow you to putso much force onto them as to bend the bar (or mar the work piece). Although you won't pull any unruly hardwood glue joints together withthese, they definitely have their place.The cost is high, but to do whatthey are designed to do, I wouldn't trade the ones I have for anything onthe market.

Click Here to see more reviews about: Quick-Grip 00524 Bar Clamps

Product Description:
New and improved one-handed clamp delivers 300 lbs of sustained clamping force, an i-beam bar, and locking swivel jaw. Patented Locking Swivel Jaw.3-1/2" Throat Depth.Removable Pads.Quick Change Screw.I-Beam Bar

Buy Now

Review of Gatco Sharpeners - Easy-Grip Clamp Mount

2010-05-11T03:56:00.000-04:00

The angle guide is fitted to the clamp with a smidge of glue.Quite a bit of torque is exerted on the glued pieces while sharpening and will break sooner than later if you sharpen a lot of knives.I use it to sharpen the wife's knives once or twice a year and this is not a sturdy item.Look for a clamp that's made of metal rather than plastic.

Click Here to see more reviews about: Gatco Sharpeners - Easy-Grip Clamp Mount

Product Description:
Holds your knife for easy sharpening and it is useful when sharpening large knives, or a lot of knives at a time. It can be permanently attached to any work surface with screws or C-clamped for portability. This also holds your Gatco knife clamp/angle gui

Buy Now

Review of Quick-Grip Quick Change 506QC 6-Inch Bar Clamp/Spreader

2010-05-10T09:42:00.000-04:00

This clamp uses the ingenius trigger grip design for unbelievable ease of use.This makes the clamp unbelievably easy to tighten using one hand.A few warnings about this particular product, however:
(1)Be sure the size is correct.6" is usually too small for the projects I use clamps for.This size has been great for small projects, however.I think the 18" size is a better all-around size.
(2)The plastic construction makes the clamps best for holding items "approximately" in place.If you need total clamping for cutting precision, look elsewhere.
All in all, a good product if it is the right size, and used for the right purpose.

Click Here to see more reviews about: Quick-Grip Quick Change 506QC 6-Inch Bar Clamp/Spreader

Product Description:
Quick change. High carbon, heat treated steel bar. Soft, pliable pads protect fine finishes. Slides, adjusts, and clamps all with 1 hand. Clamp for gluing, nailing, and drilling. Ends can be switched around and turned into a spreader. No. 506QC: 6" No. 51

Buy Now

Review of Bessey TGJ2.518 2-1/2-Inch x 18-Inch Regular Duty Tradesmen Bar Clamp

2010-05-09T07:09:00.000-04:00

I own several of these Bessey clamps in various lengths, and I think the world of them. I reach for these clamps the most often in my shop.I have never experienced the bar "bowing" like other clamp bars tend to do - not at any length.With a veryreasonable pricetag, I think these are some of the better all-around clamps on the market.

Click Here to see more reviews about: Bessey TGJ2.518 2-1/2-Inch x 18-Inch Regular Duty Tradesmen Bar Clamp

Product Description:
This Tradesman Medium Duty Clamp has an 18" clamping capacity,1" x 1/4" rail size, 2-1/2" throat depth, and nominal clamping pressure of 600 lbs. It is part of Besseys Tradesman line of bar clamps that features a patented nonslip locking system, greater holding power than any other clutch-style clamp, corrugated cast jaws, high quality galvanized profiled rail, coated oversized acme thread, large ergonomically shaped wood handle, and glue-resistant non-marring plastic caps.

Buy Now

Review of Master Lock 3065DAT 6-Foot-by-2-Inch Spring Clamp Tie Downs with PVC Grip and Retention Hooks

2010-05-08T06:36:00.000-04:00

I use these to tie-down my motorcycles and they work great.It is nice that they are oversized, I've watched my buddy's tie-downs fall apart over the past year.The retention hooks are a nice touch also.

Click Here to see more reviews about: Master Lock 3065DAT 6-Foot-by-2-Inch Spring Clamp Tie Downs with PVC Grip and Retention Hooks

Product Description:
Premium Spring Clamp Tie-Down with Strap Trap-As the world?s largest manufacturer of padlocks and portable security products, Master Lock has set the standard for quality and selection for more than 80 years. Building on this tradition, Master Lock continues to expand its commercial products and services to better meet our customer?s changing security requirements. Trust Master Lock for the innovative products, security, support and service you need.2 pack - 6 X 2" spring clamp tie down with Strap Trap-, S hooks with clips2.500 lbs. break strength - 833 lbs. actual useOver-molded grips protect and aid inMonster Weave- strapping for added strength and durabilityS-hooks with retention clips keeps hooks in placeBungee cord and toggle to keep strap firmly in place during useIdeal for storing tie down when not in useRetail injection molded plastic packaging

Buy Now

Review of Bessey TGJ2.506 2-1/2-Inch x 6-Inch Regular Duty Tradesmen Bar Clamp

2010-05-07T18:18:00.000-04:00

I have recently puchased several sizes of the Tradesman clamps offered by Bessey. I am delighted with their performance. The Bessey clamp is far superior to other bar clamp offerings from suppliers such as Jorgensen. TheBessey clamps have a much sturdier bar and larger clamp screw with ACMEthreads. They also come with protective plastic pads that do not marr theproject. Jorgensen on the other hand requires you to purchase protectivepads seperately and they tend to leave an oily mark. The Bessey clamps aresimple to operate and the serated edge and set screw system workflawlessly. By far the most clamp for the money.

Click Here to see more reviews about: Bessey TGJ2.506 2-1/2-Inch x 6-Inch Regular Duty Tradesmen Bar Clamp

Product Description:
This Tradesman Medium Duty Clamp has a 6" clamping capacity, 1" x 1/4" rail size, 2-1/2" throat depth, and nominal clamping pressure of 600 lbs. The clamp is part ofBesseys Tradesman line ofbar clamps that features a patented nonslip locking system, greater holding power than any other clutch-style clamp, corrugated cast jaws, high quality galvanized profiled rail, coated oversized acme thread, large ergonomically shapedwood handle, and glue-resistant non-marring plastic caps.

Buy Now

Review of Bessey TGJ2.524 2-1/2- by 24-Inch Regular Duty Tradesmen Bar Clamp

2010-05-06T12:12:00.000-04:00

I own several of these Bessey clamps in various lengths, and I think the world of them. I reach for these clamps the most often in my shop. I have never experienced the bar "bowing" like other clamp bars tend to do - not at any length. With a very reasonable pricetag, I think these are some of the better all-around clamps on the market.

Click Here to see more reviews about: Bessey TGJ2.524 2-1/2- by 24-Inch Regular Duty Tradesmen Bar Clamp

Product Description:
Bessey's proven clamp design has made it the choice of professionals worldwide. This Tradesmen bar clamp is a fast-action, high-quality sliding arm bar clamp that features a patented profiled rail, an I-beam design that minimizes the flexing or bending common with flat bar rails, and a patented non-slip locking device. It also offers a zinc-finished drawn rail with six serrated faces to prevent black marks from appearing on wood, protective non-marring pads, and a comfortable ergonomic grip wood handle. The TGJ2.524 is ideal for sheet metal, stainless steel, light duty work and woodworking applications.

Buy Now

Review of 4pak - Irwin 6" Quick-Grip Minis

2010-05-05T18:02:00.000-04:00

I have four that I have been using for over a year to build various projects.I don't use them every day, but for light duty these clamps have been performing well.They grip tightly.Releasing is easy with squeezing the metal lever.I don't expect them to be as well made as Bessey and such clamps, but for the price, they are valuable as extra hands.I like them enough to buy another four when they went on sale at the local home improvement warehouse.One can never have enough clamps!

Click Here to see more reviews about: 4pak - Irwin 6" Quick-Grip Minis

Product Description:
Like all Quick Grip® clamps, the Mini Bar Clamps allow you to use one hand to apply as much or as little pressure as you please. Use them once and you'll never want to use C-clamps again. Their compact size and precision feel make them perfect for smaller projects. Set includes four 6" Mini Bar Clamps.

Buy Now

Review of Quick-Grip 59400CD 4-Inch Handi-Clamp

2010-05-04T18:43:00.000-04:00

These clamps are very quick to apply and release but due to the lack of mechanical advantage, the distance from the pivot to the clamps is virtually the same as the distance from the pivot to the end of the handles, you cannot apply much more than hand pressure to the work. These may work fine for clamping the work while glue sets up or for stabilizing a router guide or some other task that does not require a lot of pressure but cannot compare to C-clamps or Vice grips in holding power. I bought 3 of these things for use in an industrial environment to clamp stops in a vertical boring machine but they would slip at the slightest impact, no matter how hard I tried to clamp them. As I pointed out, the problem seems to be the lack of mechanical advantage in clamping. The design simply will not allow you to hold any item tighter than you can hold it with your hand. In applications where you need another hand to hold something, they are probably just fine, and just that, another hand.

Click Here to see more reviews about: Quick-Grip 59400CD 4-Inch Handi-Clamp

Product Description:
Irwin 59400CD Handi-Clamp 4"Irwin 59400CD Handi-Clamp 4" Features:; Quick-Release " trigger allows for fast and easy positioning and release ; Patented ratcheting mechanism provides adjustable clamping pressure and significantly reduces hand force required to generate clamping pressure; High-tech resin construction provides strength and durability ; Specially designed jaws hold odd-shaped work pieces ; 4" clamping and spreading capacity, 3" throat depth

Buy Now

Review of Bessey TG4.008 4-Inch x 8-Inch Regular Duty Tradesmen Bar Clamp

2010-05-03T13:58:00.000-04:00

These clamps get used often in my shop. They have enough reach, 4" , to clamp a project to a bench or tool table. The 8" is perfect for those quick glue ups that don't require a long clamp.I reach for these instead of C-clamps since you can adjust them quickly. You wouldn't go wrong with a few sets of these.

Click Here to see more reviews about: Bessey TG4.008 4-Inch x 8-Inch Regular Duty Tradesmen Bar Clamp

Product Description:
This Tradesman Heavy Duty Bar Clamp has an 8" clamping capacity, 1" x 5/16" rail size, 4" throat depth, and nominal clamping pressure of 800 lbs. It is part of Besseys Tradesman line of bar clamps that features a patented nonslip locking system, greater holding power than any other clutch-style clamp, corrugated cast jaws, high quality galvanized profiled rail, coated oversized acme thread, large ergonomically shaped wood handle, and glue-resistant non-marring plastic caps.

Buy Now

Review of Cooper/Regent MCL35 Pistol Grip Clamp Work Light 35-Watt

2010-05-02T14:58:00.000-04:00

This product is an excellent addition to the lighting in my shop.I have installed one on my drill press and one on my jeweler's lathe.They both provide bright focused light for the very small work that I perform in the creation of my custom designs.

Click Here to see more reviews about: Cooper/Regent MCL35 Pistol Grip Clamp Work Light 35-Watt

Product Description:
Cooper Industries MCL35 Pistol Grip Clamp Work Light 35 WattCooper Industries MCL35 Pistol Grip Clamp Work Light 35 Watt Features:;Portable clamp light attaches to almost any surface;Includes premium halogen bulb;Perfect light for automotive maintenance, repairs, and do-it-yourself projects;Strong spring clamp for surface mounting, clamps on 2" x 4" stud;Light can also be hung with vinyl coated hook, included;Comfortable foam cushioned pistol grip;Operates on standard 120 volt household current;UL and CSA listed for indoor and outdoor use in wet locations;2 year warranty

Buy Now

Review of Grip-On 186-12 12-Inch Chain Pipe Cutter Locking Pliers, Heavy Duty, Red Epoxy-Coated

2010-05-01T14:55:00.000-04:00

Works great.I struggled with other pipe cutters for hours, finally bought this with overnight shipping and fixed the problem in just a few minutes.

Click Here to see more reviews about: Grip-On 186-12 12-Inch Chain Pipe Cutter Locking Pliers, Heavy Duty, Red Epoxy-Coated

Product Description:
12" Chain Pipe Cutter for 4-1/2" DiameterCuts piping (welded & seamless) up to 6mm wall thickness in inaccessible areas by simple ratcheting. Eliminates hand gripping effort and ensures perfect tracking. Allows quick and efficient cutting of exhaust pipes in position.

Buy Now

Review of Locking `C` Clamp w/ Swivel Pad - 18 In

2010-04-30T18:50:00.000-04:00

I recently purchased a floor model drill press (green brand) based partly on the large table that comes with it.I failed to notice (one star for me) that the table does NOT have any 'holes' in it for the standard drill press clamps that bolt down through the opening.

Even with a make shift table and fence I still needed some means of holding down my work. Trying to drill free hand is both potentially dangerous and disastrous to a work project.

The IRWIN vice grips with swivel pads seemed to be the ideal answer.However, as I scanned through the (then current) listings, I could not find specifications for the throat depth, I didn't know if I needed the 4SP,the 24SP or something in between.

An email to IRWIN customer service was answered the same day and I ultimately had a friendly exchange of emails with one of their CS reps 'Ken' who provided all of the information I requested.

I ordered the 18SPs through Amazon and had them in hand within five days.I was using them within 30 minutes of taking them out of the box. SEE MY PHOTOS ON DRILL PRESS.

PROS:
1.Tool does everything expected;
2.One handed operation;
3.Swivel pads has NOT mar any wood;
4.Once clamped the item stays in place;
5.Mfg customer service was informative and prompt to respond.

CONS:
1.Pricey item but works well, appears sturdy and I DON'T expect to ever have to buy another one.

WOULD BUY AGAIN:Yes, tool was exactly what I needed.

Click Here to see more reviews about: Locking `C` Clamp w/ Swivel Pad - 18 In

Product Description:
18"/455mm Locking "C" Clamp with Swivel Pad Jaw adjustment 0 - 8"/0 - 200mm. Throat depth: 9-1/2" (241mm). Jaws open wide to take on more - wide-opening jaws provide greater versatility in clamping a wide variety of shapes. Powerful locking mechanism. Adjusting screw gives exacting pressure - simply turn the adjustment screw to change jaw opening and clamping pressure. Stays adjusted for repetitive use. Guarded release helps keep work fast and safe - guarded release trigger quickly unlocks. Swivel pad for holding without damagaing work surface.

Buy Now

Review of 50" PRO-GRIP STRAIGHT EDGE CLAMP

2010-04-29T01:30:00.000-04:00

I bought this item to cross cut 4' x 8' panels.I've used it for three projects and it is perfect for my application.I would however only recommend this product for panels that are at least 1/2" thick.It doesn't seem to clamp well with thinner material.

Click Here to see more reviews about: 50" PRO-GRIP STRAIGHT EDGE CLAMP

Product Description:
The Pro-Grip straight edge clamp is an obstruction free, easy to use straight edge. A perfect woodworking combination edge guide and clamp system. Quick, easy and adjustable edge to edge clamping with low profile jaws that don't get in the way. Triple cam lock lever for easily securing your stock or your clamp to the table top surface.

Buy Now

Review of Locking Welding Clamp - 9 In

2010-04-28T10:13:00.000-04:00

I have a new one (ordered in 2009) and an old one (made probably 15 years ago).The new one
has no upper jaw brace, thinner metal overall, and doesn't have as deep a throat.However it
does have a wider flange on both jaw brazes.They work about the same.I'd say look in the
used tool stores and garage sales/fleamarkets- you might save a lot.

Click Here to see more reviews about: Locking Welding Clamp - 9 In

Product Description:
9"/225mm Locking Welding ClampVISE-GRIP locking pliers are built to last a lifetime. They are made from high-grade alloy steels and heat-treated for maximum toughness and durability. Each tool is treated with a bright, nickel-plated surface for an attractive, corrosion-resistant finish.Once in the locked position, this tool will not slip. The jaw curve of VISE-GRIP locking pliers puts tremendous pressure on four points of contact on any style nut or bolt head. This special design works equally well on flat and odd-shaped pieces. Jaw width - 2 3/4"/70mm. Throat depth - 1 5/8"/41mm. U-shaped jaws for visibility and working space. Holds work in proper alignment.

Buy Now

Review of Quick-Grip 53006 Micro Clamp

2010-04-27T11:28:00.000-04:00

If you build scale models and other miniatures, you will find that two or more of these clamps are part of your essential kit.They are about the closest thing you will find to untiring fingers.They can hold softly or as firmly as any screw clamp.The parts and pads seem impervious to model making solvents and chemicals.
I also use them as a simple hand vice.Fixtures and jigs that utilize clamping can be taped to the jaws.The main bar can be replaced with a brass strip if you need a greater reach, but also need the smallness of these jaws.Household repairs?No.The slightly stouter Quick-Grips are much more rigid.These are for very light work and are the right tool for the delicate work of model building
I'd give a sixth star if I could!

Click Here to see more reviews about: Quick-Grip 53006 Micro Clamp

Product Description:
Small size of the popular Quick Grip bar clamp line (smaller than mini Quick Grip). High carbon, heat treated steel bar. Soft, durable pads protect delicate work. Easily converts from clamp to spreader. Small size makes tool ideal for tight spaces, crafts

Buy Now

Review of 24" Speedy Grip Bar Clamp

2010-04-26T12:07:00.000-04:00

Like the title says, good for the price.It is a bar clamp, and it does what it's supposed to.Not the best quality, and the trigger operates backwards from most bar clamps; but hey, it is well less than half the price of other bar clamps.I have a few much better made bar clamps already, but with the price of these you can get two 'pairs', say 24" and 18" for the price of one 'better' 24".Are they the best, no, but they certainly are a great deal and are everything you need for most purposes.

Click Here to see more reviews about: 24" Speedy Grip Bar Clamp

Product Description:
Excellent quality and durability. Simply reverse jaws for handy spreader. One of the handiest, most effective tools ever invented! Easily converts from clamp to spreader. 4" Speedy Grip Bar Clamp * Pistol grip clamping action * Quick release button * 24" capacity

Buy Now

Review of All in One Clamp T-36 36-Inch Double Grip Bench Clamp w/T-track

2010-04-25T17:09:00.000-04:00

After learning to use which did not tak.e long at all. Found it easy to use and set up and can get accurate Cuts quick.

Click Here to see more reviews about: All in One Clamp T-36 36-Inch Double Grip Bench Clamp w/T-track

Buy Now

Review of Irwin 226200 3-Inch Quick-Grip Corner Clamp

2010-04-24T19:29:00.000-04:00

Absolutely DO NOT BUY THIS PRODUCT.I am not kidding.Just like other owner's, I too had the same problem with it.The tiny c-clamps/rings pop off when you tight the clamp onto the wood and renders the clamp useless.This happened on the first project that I used it on and now the c-clamp is gone and the product is useless without the part.DO NOT BUY.The manufacturer should be ashamed of themselves for making such a cheaply built product.Other manufacturers make this same style product, but they don't use the cheap c-clamp keeper rings.Didn't they test the product before they put it out on the market?The manufacturer should refund everyone who has ever purchased this item because this problem will and has happened to every Irwin 226200 corner clamp that they have made, not just mine.BOOOOO!

Click Here to see more reviews about: Irwin 226200 3-Inch Quick-Grip Corner Clamp

Product Description:
The Irwin Quick-Grip 3-Inch Corner Clamp is especially good for making picture frames and other small projects. It can hold 200 pounds of pressure while protecting your work piece with nylon rounds. A composite metal body and steel screws create a strong clamp that's backed by Irwin with a lifetime warranty.

Buy Now

Review of Irwin 224134 Quick-Grip 3/4-Inch Pipe Clamp

2010-04-23T14:19:00.000-04:00

The few negative reviews here about the clutches being installed backwards almost kept me from buying these, but I decided to give them a try anyway since intuitively it seemed that the clutches and spring must be user serviceable.They arrived a day ago and I just got some black iron pipe for them to check fit and operation, and I must say I am very impressed with these clamps.The fit is tight and precise, the screw turns easily without binding, and the sliding jaw moves easily along the pipe.Cosmetically they are much nicer than any other I have seen in stores.The clutches on mine were all installed properly -- however, had they been installed in any other manner I could have simply compressed the spring by hand, removed the clutch plates and reinstalled them in the correct orientation!No problems there (I tried it and verified that if installed upside-down they will cause the problem mentioned in previous reviews, but as I said this is easily fixed).I bought these because of the extended height of the feet, which do allow knuckle clearance when operating the hand screw.The feet seem to be wider also, making these more stable.One thing I did notice is that the entire screw length can not be used due to the handle butting up against the end of the clamp when tightened all the way (maybe an inch of unused threads) but this is trivial -- there is plenty of thread length to do the job.I bought four sets of these for some furniture building projects I am working on, and will buy more in the future!The only things this clamp does not have vs. the Rockler ones is the lip on the threaded foot for hanging on a rack, and pre-drilled holes for mounting extention blocks.I plan to take a 2x4 and cut some notches in it so I can simply slide the pipe into the notch with the threaded jaw resting on the top for easy hanging, and if I ever need to mount anything to the jaws I can drill the holes easily enough.I do like the fact that the pipe does not have to be threaded, although the pipe I bought has threads cut and it works great.If you're looking for a high-quality pipe clamp buy these!Feel free to email questions to me (just remove the "nospam" from the address).

Click Here to see more reviews about: Irwin 224134 Quick-Grip 3/4-Inch Pipe Clamp

Product Description:
Quick-release clutch system eliminates the need for threaded pipe.Larger feet offer increased stability and increased space between handle and work top.

Buy Now

Review of Quick-Grip 530062 Micro Bar Clamp

2010-04-22T04:36:00.000-04:00

Unlike the previous reviewer I felt that these delivered very little clamping pressure.I own several of the larger Irwin clamps and compared to them this is one very disappointing clamp.I'll keep the two I've got for special situations where a little clamping will do, but certainly will not buy any more.

Click Here to see more reviews about: Quick-Grip 530062 Micro Bar Clamp

Product Description:
Set includes 2 each of model No. 53006. Small size of the popular Quick Grip bar clamp line (smaller than mini Quick Grip). High carbon, heat treated steel bar. Soft, durable pads protect delicate work. Easily converts from clamp to spreader. Small size m

Buy Now

Review of Heavy-Duty Extra-Large 9" Steel Spring Clamp - PVC Cushion Grip & Tips

2010-04-21T19:51:00.000-04:00

For as inexpensive as these clamps were, I did not have high expectations.However, they are really quite sturdy, and I am very pleased with the quality.

Click Here to see more reviews about: Heavy-Duty Extra-Large 9" Steel Spring Clamp - PVC Cushion Grip & Tips

Product Description:
Outstanding value in well-made, simple-but-highly-effective hand tools with more uses than you can count.Powerful, hold-tight grip from heavy-duty wound-steel springs yet gentle on softer materials with protective soft PVC coating.

Buy Now

Review of Irwin 536QCN Quick-Grip Bar Clamp

2010-04-20T05:27:00.000-04:00

This clamp uses the ingenius trigger grip design for unbelievable ease of use.This makes the clamp unbelievably easy to tighten using one hand.A few warnings about this particular product, however:
(1)Be sure the size is correct.I think the 36" size is too big for all but the biggest projects.I think the 18" size is the best all-around size.
(2)The plastic construction makes the clamps best for holding items "approximately" in place.If you need total clamping for cutting precision, look elsewhere.
All in all, a good product if it is the right size, and used for the right purpose.

Click Here to see more reviews about: Irwin 536QCN Quick-Grip Bar Clamp

Product Description:
The Quick-Grip Quick Change 36-Inch Bar Clamp/Spreader is two tools in one. It converts to a spreader by reversing clamp pad. It has quick one-handed operation and non-marring, stay-on pads, that protect finish and yet can be replaced. It is made in the USA from the makers of vise-grip locking hand tools and comes with a full lifetime warranty.

Buy Now

Review of Jorgensen 50 Pony 3/4-Inch Pipe Clamp Fixture

2010-04-19T19:26:00.000-04:00

These clamps are great and no matter how many you own you will always need one more.To make them even more usable buy pipe that is threaded on both ends.Then you can use a connector to join the pipes together if you need a longer clamp.We connected five 48" bars together once to make a 20' clamp and used it to draw up the rails on a deck.

With both ends threaded you'll need to protect the threads on the exposed end of the clamp.For 3/4" pipe I use 1" heavy rubber chair foot protectors.They are the rubber pads you often see used on the bottom of a cane or pair of crutches. You should be able to find them at any hardware or big box store sold in packs of four for a couple dollars. Just think of it as a low cost investment that may save you a lot of grief later on. The pads last almost ten years before they dry out and need to be replaced. They'll not only protect the pipe threads but if you ever stand them up on end, and we all do, they won't slip and possibly damage a job site floor.When doing a kitchen one of our guys had a clamp slip and the cost of the floor repair would have bought more pads than you and I both would have used in several lifetimes.

Additionally, you should consider putting rubber pads on the end all of your pipe clamps whether they're threaded or not. I have a crescent shaped scar on my right foot that is a constant reminder that every pipe clamp needs a rubber pad on the end.For almost 30 years I've kept pads on every 3/4" pipe clamp I own and if the pad is off or missing it does not leave the shop.

Click Here to see more reviews about: Jorgensen 50 Pony 3/4-Inch Pipe Clamp Fixture

Product Description:
This 1/2" pipe clamp set incorporates standard Acme cut steel threaded screws for a securing hold and final tightening. The tail-stop features a multiple-disc-clutch for fast easy adjustments while holding work securely. Often considered the industry standard for pipe clamps, "Pony" clamps are made in the USA and designed to be used on standard1/2" black pipe to offer the flexibility of creating any clamping length. Easy to assemble, ideal for woodworking with a wide range of applications from industrial to do-it-yourself type projects. Setinclude one each head and tail units.

Buy Now

Review of E. Emerson Tool T-50 All in One Clamp 50-Inch Double Grip Bench Clamp with T-track

2010-04-18T12:35:00.000-04:00

I bought the T-50 50" Double Grip Bench Clamp with T-track for a large acrylic project. Cell cast acrylic sheets, 1/2 and 3/8" thickness, were cut with the T-50 as a guide for my circular saw. The T-50 is light for its size, is easy to allign and clamps well - lots of force and without losing my allignment. It held the acrylic well while the cuts were made - even 48" cuts while clamped on smooth acrylic edges. I was able to hold very close tolerances on all cuts, exceeding my expectations.

I have also used the T-50 on additional projects - including particle wood and plywood - usually as a router or saw guide. It has performed well on all occasions.

Click Here to see more reviews about: E. Emerson Tool T-50 All in One Clamp 50-Inch Double Grip Bench Clamp with T-track

Product Description:
The All in One Clamp T-50 50-Inch Double Grip Bench Clamp with T-track is a versatile bench clamp that also serves as fence and power tool guide. This clamp helps provide smooth, accurate sawing and routing on a variety of projects, and is completely adjustable for use with both drill presses or bandsaws. The T-track profile matches on all the clamps so guide plates and stops will fit on all your clamps, and it makes it easy to use accessories. This 50-inch clamp is has a 3/4-inch plywood profile thickness.

Buy Now

Review of Pony 52 2-1/2-Inch Pipe Clamp Fixture for 1/2-Inch Black Pipe

2010-04-17T18:01:00.000-04:00

These clamps are the little cousin of Pony's great 3/4" pipe clamps. While the 1/2" clamps work fine within their limits, they do havelimits.Applying a lot of pressure will flex a 1/2" pipe, possiblyleading to an out of square joint.I also do not think that the clamptightening mechanism is as well made as on the 3/4" clamps, but it isstill pretty good.I have several of these clamps and while I think theyare a good value for the money, I would suggest spending a few more dollarsfor the 3/4" clamps.

Click Here to see more reviews about: Pony 52 2-1/2-Inch Pipe Clamp Fixture for 1/2-Inch Black Pipe

Product Description:
The Pony 2-1/2-Inch Pipe Clamp Fixture allows you to make bar clamps of any length with a 1/2-inch pipe (not included). No holes, notches, or rivets are required to assemble; just screw the head onto regular pipe threads. The multiple-clutch system is constructed of plated hardened steel that grips the bar automatically at any point. The clamp faces are 1-1/2-inches-square with a baked enamel finish.

Buy Now

Review of All in One Clamp T-24 24-Inch Double Grip Bench Clamp with T-track

2010-04-16T17:19:00.000-04:00

It may be an overused phrase, but the Emerson clamps are indeed the "best thing since sliced bread." Versatile for routing, cutting, clamping or just about anything else you need a fence for in your shop. I own several sizes and am very pleased.

Click Here to see more reviews about: All in One Clamp T-24 24-Inch Double Grip Bench Clamp with T-track

Buy Now

Review of Quick-Grip 58200P Spring Clamps

2010-04-15T12:54:00.000-04:00

These clamps are very disappointing (and dangerous) when using with small items. The yellow tips rotate and flex losing grip on any small items with great force.This breaks the item and causes great potential for injuring yourself in the process..

I keep them around for flat wood sheets and basic items but do NOT buy these for small projects.

Click Here to see more reviews about: Quick-Grip 58200P Spring Clamps

Product Description:
2" (50mm) Spring Clamp High-tech resin material - made of durable glass-reinforced nylon affording lightweight durability. Non-slip handles - designed for comfortable hand span. Incorporated into the handles are grooves to prevent slipping for the quickest clamping possible. Jaws configured to odd shapes - the jaws are configured to hold odd-shaped work pieces. Jaws open to complete parallel position. Non-marring, soft pliable pads - spring clamps incorporate soft, pliable, removable pads with each clamp to protect work pieces.

Buy Now

Review of Vise-Grip 24SP 24-Inch Locking Clamp with Swivel Pads

2010-04-14T08:06:00.000-04:00

Great for those awkward situations where a regular clamp just won't work.I seem to run into that situation a lot, and these are the answer.Typical excellent Vise-Grip quality.They can make your work safer and more accurate.

Click Here to see more reviews about: Vise-Grip 24SP 24-Inch Locking Clamp with Swivel Pads

Product Description:
Locking Clamp with Swivel Pad Size: 24" / 605mm Jaw adjustment 0 - 10" / 0 - 254mm. Throat depth: 15-1/2" / 394mm Jaws open wide to take on more - wide-opening jaws provide greater versatility in clamping a wide variety of shapes. Powerful locking mechanism. Adjusting screw gives exacting pressure - simply turn the adjustment screw to change jaw opening and clamping pressure. Stays adjusted for repetitive use. Guarded release helps keep work fast and safe - guarded release trigger quickly unlocks. Swivel pad for holding without damaging work surface. Image shows model 11SP.

Buy Now

Review of Irwin 59100CD Quick-Grip Handi-Clamp Curved Bar Clamp

2010-04-13T13:43:00.000-04:00

These clamps are fine for low pressure clamping but do not have the strengh for really tight clamping.Try the metal vise griptype clamps with smooth jaws from Harbor Freight Tools for $4.99 each instead. I use them to clamp knife handles on blades with epoxy. These are fine for light clamping of craft projects but don't pay over $3.50 each.

Click Here to see more reviews about: Irwin 59100CD Quick-Grip Handi-Clamp Curved Bar Clamp

Product Description:
Durable resin construction. Nonmarring swivel pads. Jaws designed to reach around odd shapes. 1 handed operation and simple squeeze controls pressure. Quick release trigger. Nonslip handles. Clamp for gluing, nailing, drilling, and other uses. Full case q

Buy Now

Review of Quick-Grip 5412 Mini Bar Clamp

2010-04-12T01:52:00.000-04:00

I have at least a dozen of these.They're very useful for holding a stop in place or for jigs or to hold something lightly while applying larger clamps or even to hang up your coat.They are just the right size for such purposes--the "micro" clamps are too small (although they do have their place) and the regular too heavy to be convenient.They can be manipulated with one hand, which makes them more convenient than "F" or "C" clamps.

They aren't substitutes for larger clamps--they're "mini" after all.Clamping force is not huge, but enough to be very useful for many purposes.

Action is almost but not quite parallel--clamping down will sometimes shift one of the pieces being clamped--this hasn't been a problem for me but it's something to be aware of.If you absolutely need a parallel-action clamp these aren't the right clamp for you.

One thing to do when you get them.Give the bar a thorough wipedown with solvent or degreaser--half of mine when they came had grease on them and they slipped as a result.Once I cleaned the grease off they worked much, much more satisfactorily.

Click Here to see more reviews about: Quick-Grip 5412 Mini Bar Clamp

Product Description:
High carbon, heat treated steel bar. Soft, pliable pads protect fine finishes. Ideal for clamping small jobs. Slides, adjusts and clamps all with 1 hand. Clamp for gluing, nailing and drilling. No. 546: 6" No. 5412: 12"

Buy Now

Review of Irwin Quick-Grip C-Clamp - 2in.

2010-04-11T10:53:00.000-04:00

These clamps are very sturdy, easy to clamp down hard, the threads turn smoothly, and as far as I can tell they are pretty rust resistent.I purchased 10 of these to use for wide panel glue-ups, where I place a clamp at each glue joint (sometimes with and sometimes without a straight edge to clamp against).I find that this helps me to align the boards perfectly while the glue is still wet and thus I have a lot less sanding to do later.The threads on these clamps are fine enough that I can really ease up to the maximum pressure I am going for without clamping with too much force.In the rare instances when I have really wanted to apply some torque with these, the handles have not flexed or bent at all (which is a problem with some of the cheaper c-clamps I have used).

If you have a need for some small c-clamps, I highly recommend these!

Click Here to see more reviews about: Irwin Quick-Grip C-Clamp - 2in.

Product Description:
The Irwin Quick-Grip 2-Inch C-Clamp has a long handle to prevent skinned knuckles while making it easier to apply torque. The double-threaded screw thread also cuts down on the time needed to apply pressure, and reduces drift due to screw deflection. The large swivel pad protects against damage to work surfaces and improves stability. Irwin backs its clamp with a lifetime warranty.

Buy Now

Review of Irwin Quick-Grip Resin Spring Clamp 1" Capacity #58100

2010-04-10T19:11:00.000-04:00

These have quite a bit of clamping pressure, considering their small size.These are handy for holding plans or templates on a piece of plywood and other small, non-structural clamping jobs.They are just about the right size to hold a month's worth of materials invoices together:-)I have several of these clamps in different sizes that always give you that extra hand when you need it.They also double as grip exercisers while you're watching HGTV.

Click Here to see more reviews about: Irwin Quick-Grip Resin Spring Clamp 1" Capacity #58100

Product Description:
Immediate gripping power where a need an extra hand for gluing or holding. Available in three sizes to provide the proper direct pressure: 1, 2 and 3 inch jaw openings, and can also be used for odd-shaped objects. Comfortable handles are grooved to prevent slipping. Made of lightweight glass-reinforced nylon, clamp is unaffected by moderate heat and cold. Internal spring is coated with black oxide for rust resistant performance. Soft, pliable and removable pads of thermoplastic rubber let you clamp delicate or finished materials without marring the work surface.

Buy Now

Review of Vise Grip 11R 11-Inch Regular Tip Locking C-Clamp

2010-04-09T03:50:00.000-04:00

These are the best plier locking type of clamps I've found.I tried the crescent ones, which wore out pretty quickly.The only problem I've ever had with these is getting weld slag on the clamp tips or screw threads.If the spring breaks, as it will tend to after several years of abuse, it's tricky to replace.I've gotten the replacement springs from my industrial hardware supplier, who probably found something similar and sells them as replacements.So, I'm sure they can be found at any good hardware store.

They sell several different versions of this same thing, smaller, longer arms, pivioting tips...

Click Here to see more reviews about: Vise Grip 11R 11-Inch Regular Tip Locking C-Clamp

Product Description:
Adjusts to proper opening by means of end screw and locks onto work by squeeze of hand. Permits user to hold work with 1 hand and apply clamp with other. Small jaw area at contact point ideal for close quarters. Easy release lever in handle. Made of speci

Buy Now

Review of IRWIN 5462 Quick-grip 2-6-Inch Mini Bar Clamps

2010-04-08T20:33:00.000-04:00

I bought a bunch of these at Lowes for 19.97 a pair. I love the clamps, very handy for small jobs. They won't replace my other clamp for glue ups, but they come in handy for many tasks.

Click Here to see more reviews about: IRWIN 5462 Quick-grip 2-6-Inch Mini Bar Clamps

Product Description:
Constructed from high-tech resin material, they are strong, lightweight, and durable. Soft pads protect work surfaces. Positive locking action to hold work tight. Can be used with one hand. Ideal for clamping small and odd shapes securely. Applies gradualeven pressure. Quick-release trigger lets go with a squeeze. Smaller, for tight work spaces. Two each No. 546 bar clamps included.

Buy Now

Review of Vise-Grip 18-6SP Locking C Clamp with Swivel Pads

2010-04-07T09:05:00.000-04:00

I have used my pair of these as glueing clamps, construction clamps, hold down clamps, stop block clamps and who knows what else.
They were real handy when I was assembling my Jet 5hp table saw (see that review).I usedtwo of them to hold up the cast iron extension tables while I aligned themand tightened the bolts.That was HEAVY duty.They are easy to adjust andcan be operated with one hand once the screw is adjusted to the gripthickness.
Every shop needs a variety of Vise-Grips to survive.How DIDman survive before Vise-Grips?

Click Here to see more reviews about: Vise-Grip 18-6SP Locking C Clamp with Swivel Pads

Product Description:
IRWIN Vise-Grip locking pliers - The World's Most Versatile Hand Tool

Buy Now

Review of Vise-Grip 27 9-Inch Locking Chain Clamp

2010-04-06T11:58:00.000-04:00

A handy and versatile tool! I've used one for years and its come in handy many, many times for all sorts of things.

I liked it so much, I bought this latest one as a gift!

Click Here to see more reviews about: Vise-Grip 27 9-Inch Locking Chain Clamp

Product Description:
Locking Chain Clamp Chain length - 18"/455mm. Size - 9"/225mm Holds and locks around any shape, any size. 18"/455mm chain, extension chain available.

Buy Now

Review of Quick-Grip 58300 Spring Clamps

2010-04-05T20:06:00.000-04:00

I've had a box of these for quite a while and I'm always finding new uses for them.They are real handy to hold stop blocks on your radial arm saw fence, drill press fence and table saw miter gauge fence.I hold projectstogether during "dry assembly" and while tracing parts forreproduction.You can clip a note or plan on anything the jaw willstradle.Did I mention gluing?They're just a little too tight to use fora nose clamp when you're working around Ralph after he had those beans forlunch, but you should use a respirator, anyway.

Click Here to see more reviews about: Quick-Grip 58300 Spring Clamps

Product Description:
3" (75mm) Spring Clamp High-tech resin material - made of durable glass-reinforced nylon affording lightweight durability. Non-slip handles - designed for comfortable hand span. Incorporated into the handles are grooves to prevent slipping for the quickest clamping possible. Jaws configured to odd shapes - the jaws are configured to hold odd-shaped work pieces. Jaws open to complete parallel position. Non-marring, soft pliable pads - spring clamps incorporate soft, pliable, removable pads with each clamp to protect work pieces.

Buy Now

Review of All in One Clamp A-12 12-Inch Grip Clamp Guide with T-Track

2010-04-04T03:16:00.000-04:00

clamps can be habit forming , this is great, a little specialised, but we all need help on cutting and routing straight along a line.

Click Here to see more reviews about: All in One Clamp A-12 12-Inch Grip Clamp Guide with T-Track

Product Description:
With the E. Emerson 12-Inch Grip Clamp Guide with T-track, you will experience a rugged, easy-to-use tool that helps you make clean, precise cuts without side shift. Commonly used as a guide with circular saws and routers, this versatile clamp comes with a convenient T-track, adding functionality for use with a variety of tools.

The E. Emerson 12-Inch Grip Clamp Guide with T-track offers:

A click lock sliding jaw and a scale ruler for precision
Zytel nylon components for durability
Compatibility with routers, table saws, drill presses, and shop jigs

Adjust the click lock sliding jaw with a few simple steps. View Video Demo.

The grip clamp offers a full range of compatibility with tools from table saws to homemade shop jigs. View larger.

Clear, easy-to-read measurements add ease and precision to any task. View larger.Highly Versatile and Efficient
Whether you're cutting dados for a bookshelf or simply trimming a door to size, you'll find this clamp a highly capable addition to your shop. Compatible with circular saws and routers, table saws, and drill presses, this tool can even be paired with standard homemade shop jigs. And with the included T-track, you can tackle jobs requiring accessory saws, router guide plates, and stop blocks.
Click Lock Sliding Jaw for Precision
With an exclusive no side-shift design, this versatile 12-inch clamp will get your cutting, sawing, and drilling to an expert level in no time at all. With the exclusive Click Lock feature, the sliding jaw adjusts easily and clamps firmly into place to eliminate side play. It also unfastens easily to allow swift adjustments required for more complex projects, helping you to create flawless lines and ensure safe conditions.
User-Friendly Setup Saves Time
Praised for its quick, intuitive setup and flawless results, the 12-Inch Grip Clamp saves you time and energy. It is designed with ergonomic features like wide-lever, easy-grip handles, making it easy to work safely and comfortably. And with its clear measurement markings, such as the full-color scale ruler, this tool makes precision work easier, giving you the satisfaction of a job well done.
Weighing in at only four pounds, this tool is built for easy and convenient portability. But despite its lightweight, slender frame, it's also designed for durability, boasting clamping components that are engineered with resilient Zytel nylon, which includes nine-percent glass content. The clamping components are backed by a lifetime warranty.
About E. Emerson Tool Company
E. Emerson Tool's innovative approach to manufacturing is based on a persistent commitment to improvement. With the company's devotion to quality, it's no surprise that the All-in-One Single Clamp--now on its sixth revision--is E. Emerson's most popular line of straight edge clamps among expert craftspeople and hobbyists.
What's in the Box
Emerson 12-Inch Grip Clamp Guide with T-track

Especially handy for complex projects, the sliding jaw adjusts easily and clamps firmly into place to produce quick, flawless work.

Buy Now

Review of Vise Grip 6R 6-Inch Locking C-Clamp

2010-04-03T21:20:00.000-04:00

Vice Grip makes the best locking plier type clamps available.Other brands wear out, don't clamp good, and are of inferior quality.

Click Here to see more reviews about: Vise Grip 6R 6-Inch Locking C-Clamp

Product Description:
Adjusts to proper opening by means of end screw and locks onto work by squeeze of hand. Permits user to hold work with 1 hand and apply clamp with other. Small jaw area at contact point ideal for close quarters. Easy release lever in handle. Made of speci

Buy Now

Review of Irwin 18R Vise-Grip C-Clamp

2010-04-02T22:25:00.000-04:00

Works fine, Great for hard to reach parts that need to be held in place.I need a second pair.

Click Here to see more reviews about: Irwin 18R Vise-Grip C-Clamp

Product Description:
Adjusts to proper opening by means of end screw and locks onto work by squeeze of hand. Permits user to hold work with 1 hand and apply clamp with other. Small jaw area at contact point ideal for close quarters. Easy release lever in handle. Made of speci

Buy Now

Review of Quick-Grip 546 Mini Bar Clamp

2010-04-01T19:07:00.000-04:00

I have several of these clamps purchased in the late 90's when they were marketed by American Tool Companies.They have been fantastic clamps and are the first clamps that I reach for when working on small projects.

I recently purchased some of the newer Irwin Mini Quick-Grip clamps, which seemed identical to the old ones except for the blue color.Unfortunately, the pistol grip trigger on the newer Irwin clamps does not engage the bar until it has been depressed about half way.The trigger on my older clamps engages immediately and advances the bar much further for each squeeze.In searching through the clamps on display at a local store, I found that the trigger action varied considerably.I was able to find a pair that worked reasonably well, but not nearly as well as my older American Tool Mini Quick-Grips.

The bar on the newer Irwin clamps also seems to be made of a softer steel.The locking mechanism leaves a groove in the bar each time the clamp is locked securely.The bars on my old clamps are still perfectly smooth after years of use.

Click Here to see more reviews about: Quick-Grip 546 Mini Bar Clamp

Product Description:
High carbon, heat treated steel bar. Soft, pliable pads protect fine finishes. Ideal for clamping small jobs. Slides, adjusts and clamps all with 1 hand. Clamp for gluing, nailing and drilling. No. 546: 6" No. 5412: 12"

Buy Now

Review of Large Heavy-Duty 6" Steel Spring Clamps - PVC Cushion Grip & Tips

2010-03-31T07:09:00.000-04:00

A great basic spring clamp and much cheaper than buying them at the local hardware supercenter. Definitely the type of thing that buying a name brand is not necessary. The generic will do the trick.

Click Here to see more reviews about: Large Heavy-Duty 6" Steel Spring Clamps - PVC Cushion Grip & Tips

Product Description:
6" Rust-Proof Clamp * PVC coated handles and tips * Pressed steel with rust proof plating * Steel spring

Buy Now

Review of All in One Clamp A-24 24-Inch Grip Clamp Guide w/T-track

2010-03-30T13:50:00.000-04:00

I just used this clamp to rout a dado in 3/4 inch birch plywood.It held firm and square and made beautifully straight grooves.

Click Here to see more reviews about: All in One Clamp A-24 24-Inch Grip Clamp Guide w/T-track

Product Description:
With the E. Emerson 24-Inch Grip Clamp Guide with T-track, you will experience a rugged, easy-to-use tool that helps you make clean, precise cuts without side shift. Commonly used as a guide with circular saws and routers, this versatile clamp comes with a convenient T-track, adding functionality for use with a variety of tools.

The E. Emerson 24-Inch Grip Clamp Guide with T-track offers:

A click lock sliding jaw and a scale ruler for precision
Zytel nylon components for durability
Compatibility with routers, table saws, drill presses, and shop jigs

Adjust the click lock sliding jaw with a few simple steps. View Video Demo.

The grip clamp offers a full range of compatibility with tools from table saws to homemade shop jigs. View larger.

Clear, easy-to-read measurements add ease and precision to any task. View larger.Highly Versatile and Efficient
Whether you're cutting dados for a bookshelf or simply trimming a door to size, you'll find this clamp a highly capable addition to your shop. Compatible with circular saws and routers, table saws, and drill presses, this tool can even be paired with standard homemade shop jigs. And with the included T-track, you can tackle jobs requiring accessory saws, router guide plates, and stop blocks.
Click Lock Sliding Jaw for Precision
With an exclusive no side-shift design, this versatile 24-inch clamp will get your cutting, sawing, and drilling to an expert level in no time at all. With the exclusive Click Lock feature, the sliding jaw adjusts easily and clamps firmly into place to eliminate side play. It also unfastens easily to allow swift adjustments required for more complex projects, helping you to create flawless lines and ensure safe conditions.
User-Friendly Setup Saves Time
Praised for its quick, intuitive setup and flawless results, the 24-Inch Grip Clamp saves you time and energy. It is designed with ergonomic features like wide-lever, easy-grip handles, making it easy to work safely and comfortably. And with its clear measurement markings, such as the full-color scale ruler, this tool makes precision work easier, giving you the satisfaction of a job well done.
Weighing in at only four pounds, this tool is built for easy and convenient portability. But despite its lightweight, slender frame, it's also designed for durability, boasting clamping components that are engineered with resilient Zytel nylon, which includes nine-percent glass content. The clamping components are backed by a lifetime warranty.
About E. Emerson Tool Company
E. Emerson Tool's innovative approach to manufacturing is based on a persistent commitment to improvement. With the company's devotion to quality, it's no surprise that the All-in-One Single Clamp--now on its sixth revision--is E. Emerson's most popular line of straight edge clamps among expert craftspeople and hobbyists.
What's in the Box
Emerson 24-Inch Grip Clamp Guide with T-track

Especially handy for complex projects, the sliding jaw adjusts easily and clamps firmly into place to produce quick, flawless work.

Buy Now

Review of All in One Clamp U-99 99-Inch Ultra Wide Grip Clamp with Double T-Track

2010-03-29T11:31:00.000-04:00

I can not begin to describe how well this clamping tool guide works.It is easily adjustable to clamp on any width work piece but, obviously, this one was made to rip 8' sheet material.The guide has three levels of clamping force but the first level is enough to secure the guide so that it will not move during ripping.

This guide absolutely does not bow to the side as you rip.You can press the base plate of your circular saw tight against the side of this guide and rip away.For the first time I can rip a full 8' sheet of plywood and the cut is consistent width the full length.This is virtually impossible to do with cheaper guides like the thin-gauge, two-piece one from Johnson.

This guide has two t-slot tracks as well so you can design jigs and stops to attach to the guide.I purchased the optional 9"x12" HDPE saw plate for circular saws that runs in the T-track of the guide but I haven't used it yet.I don't know if I will ever have the need to.If the guide doesn't bow sideways, and believe me, this one doesn't, you can get a straight cut without the need of linking your circular saw to the guide with the optional plate.

The guide has slots that allow you to insert optional ruled scales (SAE or metric).However, I have purchased these and they are no good. The measuring scale is made of thin plastic laminated on paper and is off by 1/8" within 48".See my review for the "All in One Clamp I-99 99-Inch Scale (English)" product.This applies to all the E. Emerson all in one measurement scales that I have purchased.However, the extra wide surface between the T-slots on the Ultra Wide clamp leaves plenty of room to add a quality adhesive backed measurement tape such as those sold for table saw rip fence rails.I plan to purchase one of those to enhance my Ultra Wide.

This clamping tool guide is well worth the price and I'm glad I finally made myself try it.Do yourself a favor, through that cheap two-piece tool guide away, or that not quite straight piece of scrap lumber and buy one of these.You'll be glad you did when you start getting really straight cuts from your circular saw.

I also have the 54" Ultra Wide, the 50" standard width and the 36" standard width.See my reviews for those too.

Click Here to see more reviews about: All in One Clamp U-99 99-Inch Ultra Wide Grip Clamp with Double T-Track

Product Description:
The E. Emerson Tool Company U99.5 99-1/2-Inch Ultra Wide Grip Clamp adds extra width for superior rigidity and two T-tracks for attaching a wide range of accessories, including stops, router plates, and saw plates. Wide aluminum jaws protect soft surfaces from wear, and the jaw holes allow you to insert tall jaws, wide jaws, and story sticks. Its 8-foot length accommodates standard sheeting, helping make this the most durable, most robust clamp you can buy.

Buy Now

Review of All in One Clamp A-36 36-Inch Grip Clamp Guide with T-Track

2010-03-28T03:19:00.000-04:00

I really like this straight edge/clamp system!I purchased a 36", a 50" and the 99" wide model.The 50 and 90 are perfect to rip a 4X8 sheet of plywood.I purchased th 36" for smaller jobs using the router and powered hand saw.Using this clamp guide is quick and easy and reliable.They provide a dead on straight guide.

Make sure you use the narrower models as a guide and not put a lot of side pressure on them or they will bow ever so slightly.One the wider model this is not an issue.

The reason for the 4 stars?This one didn't work right out of the box.Nothing appeared damaged or out of place.I check it all over very carefully and it just never got a grip.So maybe I got lemon but there is something wrong or missing, or in the quality control in the 36" model.It just didn't work.Thus the 4 stars.It has been returned.

Update:

The replacement arrived and it works just fine,I really like these clamps and find a variety of ways to use.

Click Here to see more reviews about: All in One Clamp A-36 36-Inch Grip Clamp Guide with T-Track

Product Description:
With the E. Emerson 36-Inch Grip Clamp Guide with T-track, you will experience a rugged, easy-to-use tool that helps you make clean, precise cuts without side shift. Commonly used as a guide with circular saws and routers, this versatile clamp comes with a convenient T-track, adding functionality for use with a variety of tools.

The E. Emerson 36-Inch Grip Clamp Guide with T-track offers:

A click lock sliding jaw and a scale ruler for precision
Zytel nylon components for durability
Compatibility with routers, table saws, drill presses, and shop jigs

Adjust the click lock sliding jaw with a few simple steps. View Video Demo.

The grip clamp offers a full range of compatibility with tools from table saws to homemade shop jigs. View larger.

Clear, easy-to-read measurements add ease and precision to any task. View larger.Highly Versatile and Efficient
Whether you're cutting dados for a bookshelf or simply trimming a door to size, you'll find this clamp a highly capable addition to your shop. Compatible with circular saws and routers, table saws, and drill presses, this tool can even be paired with standard homemade shop jigs. And with the included T-track, you can tackle jobs requiring accessory saws, router guide plates, and stop blocks.
Click Lock Sliding Jaw for Precision
With an exclusive no side-shift design, this versatile 36-inch clamp will get your cutting, sawing, and drilling to an expert level in no time at all. With the exclusive Click Lock feature, the sliding jaw adjusts easily and clamps firmly into place to eliminate side play. It also unfastens easily to allow swift adjustments required for more complex projects, helping you to create flawless lines and ensure safe conditions.
User-Friendly Setup Saves Time
Praised for its quick, intuitive setup and flawless results, the 36-Inch Grip Clamp saves you time and energy. It is designed with ergonomic features like wide-lever, easy-grip handles, making it easy to work safely and comfortably. And with its clear measurement markings, such as the full-color scale ruler, this tool makes precision work easier, giving you the satisfaction of a job well done.
Weighing in at only four pounds, this tool is built for easy and convenient portability. But despite its lightweight, slender frame, it's also designed for durability, boasting clamping components that are engineered with resilient Zytel nylon, which includes nine-percent glass content. The clamping components are backed by a lifetime warranty.
About E. Emerson Tool Company
E. Emerson Tool's innovative approach to manufacturing is based on a persistent commitment to improvement. With the company's devotion to quality, it's no surprise that the All-in-One Single Clamp--now on its sixth revision--is E. Emerson's most popular line of straight edge clamps among expert craftspeople and hobbyists.
What's in the Box
Emerson 36-Inch Grip Clamp Guide with T-track

Especially handy for complex projects, the sliding jaw adjusts easily and clamps firmly into place to produce quick, flawless work.

Buy Now

Review of Quick-Grip Clamp - 24in.

2010-03-27T02:37:00.000-04:00

This clamp uses the ingenius trigger grip design for unbelievable ease of use. This makes the clamp unbelievably easy to tighten using one hand. A few warnings about this particular product, however:
(1) Be sure the size is correct. I think the 24" size is probably a bit too big for most projects. I think the 18" size is the best all-around size.Personal preference and common usage really should make this decision for you.
(2) The plastic construction makes the clamps best for holding items "approximately" in place. If you need total clamping for cutting precision, look elsewhere.
All in all, a good product if it is the right size, and used for the right purpose.A good collection would probably include either this or the 18" size, the 36" size and the smallest size.If building such a collection, I would start with this or the 18" size.

Click Here to see more reviews about: Quick-Grip Clamp - 24in.

Product Description:
The 24-inch bar clamp and spreader from Quick-Grip features quick-change multi-positioning jaws that lock on the end-pin or any position on the bar, plus a new quick-clip that easily converts the clamp into a spreader and a reversible/removable jaw. It also boasts one-handed operation, and non-marring, soft pliable pads to protect finish. The heat-treated black oxide bar provides added strength, rigidity and resistance to gouging, as well as rust prevention.

Buy Now

Review of All in One Clamp U-54 54-Inch Ultra Wide Grip Clamp with Double T-Track

2010-03-26T03:14:00.000-04:00

I can not begin to describe how well this clamping tool guide works.It is easily adjustable to clamp on any width work piece within 50" or less.The 50" length is great for cross ripping sheet goods (4' wide).The guide has three levels of clamping force but the first level is enough to secure the guide so that it will not move during ripping.

This guide absolutely does not bow to the side as you rip.You can press the base plate of your circular saw tight against the side of this guide and rip away.For the first time I can rip a full 8' sheet of plywood and the cut is consistent width the full length.This is virtually impossible to do with cheaper guides like the thin-gauge, two-piece one from Johnson.

This guide has two t-slot tracks as well so you can design jigs and stops to attach to the guide.I purchased the optional 9"x12" HDPE saw plate for circular saws that runs in the T-track of the guide but I haven't used it yet.I don't know if I will ever have the need to.If the guide doesn't bow sideways, and believe me, this one doesn't, you can get a straight cut without the need of linking your circular saw to the guide with the optional plate.

The guide has slots that allow you to insert optional ruled scales (SAE or metric).However, I have purchased these and they are no good. The measuring scale is made of thin plastic laminated on paper and is off by 1/8" within 48".See my review for the "All in One Clamp I-50 50" Scale (English)" product.This applies to all the E. Emerson all in one measurement scales that I have purchased.However, the extra wide surface between the T-slots on the Ultra Wide clamp leaves plenty of room to add a quality adhesive backed measurement tape such as those sold for table saw rip fence rails.I plan to purchase one of those to enhance my Ultra Wide.

This clamping tool guide is well worth the price and I'm glad I finally made myself try it.Do yourself a favor, through that cheap two-piece tool guide away, or that not quite straight piece of scrap lumber and buy one of these.You'll be glad you did when you start getting really straight cuts from your circular saw.

I also have the 99.5" Ultra Wide, the 50" standard width and the 36" standard width.See my reviews for those too.

Click Here to see more reviews about: All in One Clamp U-54 54-Inch Ultra Wide Grip Clamp with Double T-Track

Product Description:
The E. Emerson Tool Company U-54 All-in-One 54-Inch Ultra Wide Grip Clamp adds extra width for superior rigidity and two T-tracks for attaching a wide range of accessories, including stops, router plates, and saw plates. Wide aluminum jaws protect soft surfaces from wear, and the jaw holes allow you to insert tall jaws, wide jaws, and story sticks. It's especially good for 4-foot sheets, and it's the most durable, most robust clamp you can buy.

Buy Now

Review of Quick-Grip 59200CD 2-Inch Handi-Clamp

2010-03-25T19:53:00.000-04:00

I like these much better than the spring clamps we all use. It exerts more pressure with an easier release than a spring clamp of similar size. Just squeeze to lock it and it stays put. I used a couple the other day to hold a straight edge for routing dado's. I cut 3/4 x 1/2 deep runs with no slippage from the clamps. When I was done with each one I just squeezed the release and went on to the next . Lickety split. Nice idea !

Click Here to see more reviews about: Quick-Grip 59200CD 2-Inch Handi-Clamp

Product Description:
Curved bar clamp with non-marring swivel pads. Combines speed and convenience with controllable pressure just squeeze to adjust and lock! Easy one-handed operation; quick release trigger. U.S.A.

Buy Now

Review of Irwin Industrial Tools 512QC546DT 12-Inch Quick-Grip Bar Clamp with Bonus 6-Inch Mini Bar Clamp

2010-03-24T18:55:00.000-04:00

I have been crafting fine cabnitry for many years now. In the process I have used virtually every clamp and strap device on the market. From Jegenson, strap clamps, spring grip, bar clamps (circular & retangular)to the racheting designs. All have particular advantages, but the bestoverall clamp that I have used for wood glueing and wookwrking is the quickgrip. Some of their advantages are ease of clamping and or releaseing themechanism itself. The clamp can also be quickly adjusted using one handassuming that the clamp has been "gross" adjusted to theapproximate size of the work piece.Gross adjustment is a simple onesecond process of sliding the statioanry end of the clamp down the staft tothe approximate size of the work-piece.Equally easy to operate is thequick (hence the name) release button.It provides easy readjustments oftension or clamp position. Both of these features as esential whan workingalone or with a complex assembly that requires pressure while the clamp isbeing applied. The weight of the clamps that I use the most (standard 36and 24 inch clamps) are approxmiatly 2 and 2.5 lbs respectivly. These arethe lightest clamps that I have used given their holding strength. Theyprovide much more holding force than I have ever need for cabinet makingwith no apparent slippage over 24 hours (typ glue cure cycle). Their onlylimitation is their length. They come in standard lengths of 12, 18, 24,36, and 50 inch lenghts. I guess the manufacturer assumes that if you wnatto build somehting bigger than 50 inches, you and prodably a professionaland will have custom holddown hardware of your own...Keith J, San Jose,CA

Click Here to see more reviews about: Irwin Industrial Tools 512QC546DT 12-Inch Quick-Grip Bar Clamp with Bonus 6-Inch Mini Bar Clamp

Product Description:
Versatile quick-grip bar clamps are ideal for clamping or spreading. Quick advance trigger moves jaws twice as fast as standard clamps. Head or tail can be used anywhere on the bar for ultimate positioning. Heat treated steel bar with resin head and tail provide lightweight strength and durability. Clamp pressure: 250 lbs.Throat: 3 1/4in. U.S.A.

Buy Now

Review of All in One Clamp A-50 50-Inch Grip Clamp Guide w/T-track

2010-03-23T19:20:00.000-04:00

this is probably the best clamping system I have owned, I have always used Tru-grip clamps and suffered some side play issues, then I decided to give these a shot. They have a unique way of locking down the sliding clamp so as to eliminate side play, these things so not move and clamp absolutely straight, simple and easy to use - don't hesitate to purchase!

Click Here to see more reviews about: All in One Clamp A-50 50-Inch Grip Clamp Guide w/T-track

Product Description:
With the E. Emerson 50-Inch Grip Clamp Guide with T-track, you will experience a rugged, easy-to-use tool that helps you make clean, precise cuts without side shift. Commonly used as a guide with circular saws and routers, this versatile clamp comes with a convenient T-track, adding functionality for use with a variety of tools.

The E. Emerson 50-Inch Grip Clamp Guide with T-track offers:

A click lock sliding jaw and a scale ruler for precision
Zytel nylon components for durability
Compatibility with routers, table saws, drill presses, and shop jigs

Adjust the click lock sliding jaw with a few simple steps. View Video Demo.

The grip clamp offers a full range of compatibility with tools from table saws to homemade shop jigs. View larger.

Clear, easy-to-read measurements add ease and precision to any task. View larger.Highly Versatile and Efficient
Whether you're cutting dados for a bookshelf or simply trimming a door to size, you'll find this clamp a highly capable addition to your shop. Compatible with circular saws and routers, table saws, and drill presses, this tool can even be paired with standard homemade shop jigs. And with the included T-track, you can tackle jobs requiring accessory saws, router guide plates, and stop blocks.
Click Lock Sliding Jaw for Precision
With an exclusive no side-shift design, this versatile 50-inch clamp will get your cutting, sawing, and drilling to an expert level in no time at all. With the exclusive Click Lock feature, the sliding jaw adjusts easily and clamps firmly into place to eliminate side play. It also unfastens easily to allow swift adjustments required for more complex projects, helping you to create flawless lines and ensure safe conditions.
User-Friendly Setup Saves Time
Praised for its quick, intuitive setup and flawless results, the 50-Inch Grip Clamp saves you time and energy. It is designed with ergonomic features like wide-lever, easy-grip handles, making it easy to work safely and comfortably. And with its clear measurement markings, such as the full-color scale ruler, this tool makes precision work easier, giving you the satisfaction of a job well done.
Weighing in at only four pounds, this tool is built for easy and convenient portability. But despite its lightweight, slender frame, it's also designed for durability, boasting clamping components that are engineered with resilient Zytel nylon, which includes 9-percent glass content. The clamping components are backed by a lifetime warranty.
About E. Emerson Tool Company
E. Emerson Tool's innovative approach to manufacturing is based on a persistent commitment to improvement. With the company's devotion to quality, it's no surprise that the All-in-One Single Clamp--now on its sixth revision--is E. Emerson's most popular line of straight edge clamps among expert craftspeople and hobbyists.
What's in the Box
Emerson 50-Inch Grip Clamp Guide with T-track

Especially handy for complex projects, the sliding jaw adjusts easily and clamps firmly into place to produce quick, flawless work.

Buy Now